Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen

HP

HP 765253-B21 4TB 3.5" SATA 7.2K HDD

SKU CH-5BBH-90A68 MPN 765253-B21

A 4 TB 3.5 inch SATA hard drive spinning at 7.2 K rpm with a 6 Gb/s transfer rate and hot-swap tray

  • 4 TB capacity stores large data sets
  • 5 inch form factor fits standard drive bays
  • SATA 6Gb/s interface provides reliable connectivity
  • 2K RPM spindle speed delivers steady throughput
  • Hot-swap tray enables drive changes without downtime

Capacity and interface

This 4 TB hard drive connects through a SATA 6 Gb/s link in a 3.5 inch form factor. It spins at 7.2 K rpm and uses 512e sector formatting. The hot-swap tray allows removal without powering down the server.

Suited for bulk storage not speed

The drive fits HP ProLiant bays that accept hot-swap 3.5 inch SATA disks and need high capacity for archives or backups. It is not for workloads that demand SSD latency or throughput. Systems without a 6 Gb/s SATA backplane or hot-swap cage cannot use the tray feature.

Hot-swap tray decides fit

The 765253-B21 part number identifies a drive carrier that only locks into HP hot-swap drive bays. If the chassis uses fixed-mount sleds or a different vendor's tray the drive will not install.

Pluspunten

  • 4 TB capacity stores large data sets
  • 5 inch form factor fits standard drive bays
  • SATA 6Gb/s interface provides reliable connectivity
  • 2K RPM spindle speed delivers steady throughput
  • Hot-swap tray enables drive changes without downtime

Specificaties

Voor dit artikel zijn nog geen specificaties gepubliceerd.

Vragen over dit artikel

Will the 3.5 inch form factor fit my standard drive bay?

Yes, the 3.5 inch form factor matches standard internal drive bays used in servers and workstations.

How do I install the hot swap tray correctly?

Slide the drive into the hot swap tray until the SATA connector seats firmly, then lock the carrier latch to prevent disconnection during operation.

When should I plan to replace this 7.2K RPM hard drive?

Replace the drive if SMART attributes show reallocated sectors or if sustained throughput drops below expected levels for a 6Gb/s SATA interface.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.