Silver 3.5 inch bare SATA hard drive with exposed circuit board

HP AW556A 2TB 7200 RPM SATA 3.0Gb/s 3.5" Internal Hard Drive

SKU CH-9AXE-JFEYD MPN AW556A

2 TB SATA 3.0 Gb/s 7200 RPM 3.5-inch internal hard drive for server storage

PackagingBare Drive
InterfaceSATA 3.0Gb/s
Capacity2TB
RPM7200 RPM
Average Latency3Gb/s
FeaturesLFF MDL Hard Drive

2TB capacity stores large datasets
7200 RPM spindle delivers responsive throughput
SATA 3.0Gb/s interface integrates with existing controllers
5-inch form factor fits standard drive bays
Designed for server workloads and continuous operation

159,99 $

0.00203786 BTC με τη σημερινή ισοτιμία

Διαθέσιμο · αποστολή σήμερα

Το ταμείο κλειδώνει την ισοτιμία σας για 30 λεπτά.

Παράδοση προς Ηνωμένες Πολιτείες εκτίμηση

UPS Worldwide Expedited 3–6 εργάσιμες ημέρες 39,90 $
DHL Express Worldwide 2–3 εργάσιμες ημέρες 74,90 $

Προσθέστε 239,01 $ ακόμη και η βασική αποστολή γίνεται δωρεάν.

Οι εισαγωγικοί δασμοί επιβάλλονται κατά την άφιξη από τη χώρα σας.

Αποστολή αλλού

HP StorageWorks P2000 2TB SATA Drive

This HP StorageWorks P2000 AW556A is a 2TB 3.5 inch internal hard drive built for desktop and server storage. It operates at 7200 RPM with a SATA 3.0Gb/s interface and ships as a bare drive. The unit is sold new and carries the HP Qualified Option designation.

Suits Servers Needing 3.0Gb/s SATA Drives

This drive fits servers and storage arrays that accept 3.5 inch SATA drives at 3.0Gb/s transfer rates. It is not for systems requiring 6Gb/s SATA throughput or 2.5 inch form factors. Buyers needing higher spindle speeds or larger capacities should look at other models.

Deciding Spec Is The 3.0Gb/s SATA Interface

The single specification that decides fit is the 3.0Gb/s SATA interface. Controllers and backplanes limited to this speed will recognise the drive at full performance. Faster 6Gb/s hosts will negotiate down, but the drive cannot exceed the stated transfer rate.

Βασικά χαρακτηριστικά

2TB capacity stores large datasets
7200 RPM spindle delivers responsive throughput
SATA 3.0Gb/s interface integrates with existing controllers
5-inch form factor fits standard drive bays
Designed for server workloads and continuous operation

Προδιαγραφές

Brand	HP
Series	StorageWorks P2000
Model	AW556A
Packaging	Bare Drive
Interface	SATA 3.0Gb/s
Capacity	2TB
RPM	7200 RPM
Average Latency	3Gb/s
Features	LFF MDL Hard Drive
Usage	Ideal for Servers
Form Factor	3.5"
Βάρος αποστολής	1.13 kg
Διαστάσεις συσκευασίας	315 × 213 × 147 mm

Ερωτήσεις για αυτό το προϊόν

What desktop chassis or server bay is needed to fit this 3.5" drive?

The drive uses the standard 3.5-inch form factor, so it fits any desktop tower or server chassis with a 3.5-inch internal bay and a SATA data and power connection.

Will this SATA 3.0Gb/s drive work if my motherboard or controller only supports SATA 1.5Gb/s?

Yes, SATA is backward compatible, so the drive will operate at the slower 1.5Gb/s link speed when connected to an older controller.

How can I confirm the drive is running at its rated 7200 RPM and 3.0Gb/s transfer rate after installation?

Check the drive model AW556A in BIOS or use a tool such as CrystalDiskInfo to verify 7200 RPM and a SATA 3.0Gb/s negotiated link speed.

Επίσης σε αυτό το ράφι