HP
HP AW556A 2TB 7200 RPM SATA 3.0Gb/s 3.5" Internal Hard Drive
2 TB SATA 3.0 Gb/s 7200 RPM 3.5-inch internal hard drive for server storage
- PackagingBare Drive
- InterfaceSATA 3.0Gb/s
- Capacity2TB
- RPM7200 RPM
- Average Latency3Gb/s
- FeaturesLFF MDL Hard Drive
- 2TB capacity stores large datasets
- 7200 RPM spindle delivers responsive throughput
- SATA 3.0Gb/s interface integrates with existing controllers
- 5-inch form factor fits standard drive bays
- Designed for server workloads and continuous operation
HP StorageWorks P2000 2TB SATA Drive
This HP StorageWorks P2000 AW556A is a 2TB 3.5 inch internal hard drive built for desktop and server storage. It operates at 7200 RPM with a SATA 3.0Gb/s interface and ships as a bare drive. The unit is sold new and carries the HP Qualified Option designation.
Suits Servers Needing 3.0Gb/s SATA Drives
This drive fits servers and storage arrays that accept 3.5 inch SATA drives at 3.0Gb/s transfer rates. It is not for systems requiring 6Gb/s SATA throughput or 2.5 inch form factors. Buyers needing higher spindle speeds or larger capacities should look at other models.
Deciding Spec Is The 3.0Gb/s SATA Interface
The single specification that decides fit is the 3.0Gb/s SATA interface. Controllers and backplanes limited to this speed will recognise the drive at full performance. Faster 6Gb/s hosts will negotiate down, but the drive cannot exceed the stated transfer rate.
Öne çıkanlar
- 2TB capacity stores large datasets
- 7200 RPM spindle delivers responsive throughput
- SATA 3.0Gb/s interface integrates with existing controllers
- 5-inch form factor fits standard drive bays
- Designed for server workloads and continuous operation
Teknik özellikler
| Brand | HP |
|---|---|
| Series | StorageWorks P2000 |
| Model | AW556A |
| Packaging | Bare Drive |
| Interface | SATA 3.0Gb/s |
| Capacity | 2TB |
| RPM | 7200 RPM |
| Average Latency | 3Gb/s |
| Features | LFF MDL Hard Drive |
| Usage | Ideal for Servers |
| Form Factor | 3.5" |
| Kargo ağırlığı | 1.13 kg |
| Koli boyutu | 315 × 213 × 147 mm |
Bu ürünle ilgili sorular
What desktop chassis or server bay is needed to fit this 3.5" drive?
The drive uses the standard 3.5-inch form factor, so it fits any desktop tower or server chassis with a 3.5-inch internal bay and a SATA data and power connection.
Will this SATA 3.0Gb/s drive work if my motherboard or controller only supports SATA 1.5Gb/s?
Yes, SATA is backward compatible, so the drive will operate at the slower 1.5Gb/s link speed when connected to an older controller.
How can I confirm the drive is running at its rated 7200 RPM and 3.0Gb/s transfer rate after installation?
Check the drive model AW556A in BIOS or use a tool such as CrystalDiskInfo to verify 7200 RPM and a SATA 3.0Gb/s negotiated link speed.
Bu reyondan diğerleri
Müşteriler bunları karşılaştırdı
Aynı raf, aynı sipariş tamamlama — sekiz koin ve 30 dakikalık kur kilidi.
