HP HyperX FURY 16GB DDR4 2933 CL17 Black HX429C17FB/16
- 16GB
- DDR4 2933 (PC4 2340…
Δεχόμαστε κρυπτονομίσματα — έτσι ώστε αυτά που κατέχετε να μπορούν να αγοράσουν πραγματικό εξοπλισμό.Πληρώστε σε κρυπτονομίσματα, ξοδέψτε τα σε πραγματικό εξοπλισμό. Δωρεάν ασφαλισμένη αποστολή παγκοσμίως άνω των 399 $. Ουδέτερες κούτες αποστολής, χωρίς σήμανση, από τη Γερμανία.Δωρεάν ασφαλισμένη αποστολή άνω των 399 $. Η ισοτιμία σας κλειδώνει για 30 λεπτά μόλις ανοίξει το ταμείο.Κλείδωμα ισοτιμίας 30 λεπτών. Κάθε προϊόν είναι σφραγισμένο, ελεγμένο ως προς τον σειριακό αριθμό του, και καλύπτεται από εγγύηση 24 μηνών.Σφραγισμένο, με εγγύηση 24 μηνών.
HP
8 GB DDR4 desktop DIMM running at 2933 MHz with CL17 timing and a black heat spreader
Capacity 8GB
This 8GB DDR4 DIMM runs at 2933 MHz with CL17 17-19-19 timing at 1.20V. It uses a 288-pin unbuffered layout and includes a black heat spreader. The single-rank 1Rx8 design is built from eight 1G x 8-bit FBGA components. It targets desktop builders who need a straightforward capacity boost for everyday workloads.
The integrated heat spreader dissipates heat from the eight FBGA components without requiring active cooling. Operating at the standard 1.20V DDR4 voltage keeps power draw low and eliminates the need for extra voltage headroom. With no moving parts the module adds zero acoustic noise to the system.
This module replaces an empty slot or a lower-capacity DDR4 stick in a four-slot desktop board. The jump is worthwhile when the platform supports DDR4-2933 and the user needs 8GB more usable memory for multitasking or heavier browser loads. Builders who need more storage or a second memory channel populated with a matched pair should look elsewhere.
| Brand | HyperX |
|---|---|
| Series | FURY |
| Model | HX429C17FB2/8 |
| Capacity | 8GB |
| Speed | DDR4 2933 (PC4 23400) |
| CAS Latency | CL17 |
| Timing | 17-19-19 |
| Voltage | 1.20V |
| Color | Black |
| Heat Spreader | Yes |
| Features | HyperX HX429C17FB2/8 is a 1G x 64-bit (8GB) DDR4-2933 CL17 SDRAM (Synchronous DRAM) 1Rx8, memory module, based on eight 1G x 8-bit FBGA components per module. Each module supports Intel Extreme Memory Profiles (Intel XMP) 2.0. Each module has been tested to run at DDR4-2933 at a low latency timing of 17-19-19 at 1.2V. |
Άλλες εκδόσεις αυτού του μοντέλου
Ίδια οικογένεια, διαφορετική μνήμη, ψύκτρα ή συχνότητα — συγκρίνετε πριν αποφασίσετε.
Align the notch on the module with the key in the motherboard slot, press straight down until both side clips click, and verify the module sits flush; the common mistake is seating only one side so the opposite clip stays open.
No scheduled maintenance is required; keep the heat spreader dust-free with occasional compressed air and replace the module only if memory errors appear or a capacity upgrade is desired.
The JEDEC-standard 1.20 V operating voltage and CL17-19-19 timings define the stable envelope; sustained loads will hit the rated frequency and latency ceiling before any thermal throttle occurs.
Επίσης σε αυτό το ράφι
Ίδιο ράφι, ίδιο ταμείο — οκτώ νομίσματα και κλείδωμα ισοτιμίας 30 λεπτών.
Το νόμισμα στο οποίο πληρώνετε, και αυτό στο οποίο βλέπετε τις τιμές.
Αποστέλλεται από το πορτοφόλι σας στο ταμείο
Μόνο για προβολή — ο κατάλογος αναγράφεται σε δολάρια
Κανένα νόμισμα δεν αντιστοιχεί.
Επιλέξτε τη γλώσσα στην οποία σας μιλάει ο ιστότοπος.
Πρώτη επίσκεψη;
Έχετε ήδη λογαριασμό;
Δεν υπάρχει αυτόματη επαναφορά κωδικού: αυτό το κατάστημα δεν στέλνει e-mail, άρα δεν υπάρχει σύνδεσμος μίας χρήσης να ζητήσετε. Αφήστε τη διεύθυνση στον λογαριασμό σας και κάποιος θα την επεξεργαστεί με το χέρι.
Το αίτημα καταχωρίστηκε
Δεν θα λάβετε τίποτα στα εισερχόμενά σας — το κατάστημα δεν στέλνει κανένα e-mail. Κάποιος το διαχειρίζεται με το χέρι.
Τον θυμηθήκατε;