We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black rectangular DIMM module with low-profile heat spreader, 288 gold pins along bottom edge

HP

HP HX429C17FB2/8 8GB DDR4 2933 CL17 desktop RAM

SKU CH-2QAK-AYPNK MPN HX429C17FB2/8

8 GB DDR4 desktop DIMM running at 2933 MHz with CL17 timing and a black heat spreader

  • Capacity8GB
  • SpeedDDR4 2933 (PC4 23400)
  • CAS LatencyCL17
  • Timing17-19-19
  • Voltage1.20V
  • ColorBlack

Capacity 8GB

  • 8 GB capacity adds responsive multitasking headroom
  • DDR4 2933 speed keeps data flowing smoothly
  • CL17 latency reduces wait cycles for snappier response
  • 20 V operation lowers power draw and heat
  • Black heat spreader protects chips during sustained loads

HP HyperX FURY 8GB DDR4-2933 CL17 Module

This 8GB DDR4 DIMM runs at 2933 MHz with CL17 17-19-19 timing at 1.20V. It uses a 288-pin unbuffered layout and includes a black heat spreader. The single-rank 1Rx8 design is built from eight 1G x 8-bit FBGA components. It targets desktop builders who need a straightforward capacity boost for everyday workloads.

Thermals Power and Acoustics

The integrated heat spreader dissipates heat from the eight FBGA components without requiring active cooling. Operating at the standard 1.20V DDR4 voltage keeps power draw low and eliminates the need for extra voltage headroom. With no moving parts the module adds zero acoustic noise to the system.

Upgrade Context and Fit

This module replaces an empty slot or a lower-capacity DDR4 stick in a four-slot desktop board. The jump is worthwhile when the platform supports DDR4-2933 and the user needs 8GB more usable memory for multitasking or heavier browser loads. Builders who need more storage or a second memory channel populated with a matched pair should look elsewhere.

Highlights

  • 8 GB capacity adds responsive multitasking headroom
  • DDR4 2933 speed keeps data flowing smoothly
  • CL17 latency reduces wait cycles for snappier response
  • 20 V operation lowers power draw and heat
  • Black heat spreader protects chips during sustained loads

Specifications

BrandHyperX
SeriesFURY
ModelHX429C17FB2/8
Capacity8GB
SpeedDDR4 2933 (PC4 23400)
CAS LatencyCL17
Timing17-19-19
Voltage1.20V
ColorBlack
Heat SpreaderYes
FeaturesHyperX HX429C17FB2/8 is a 1G x 64-bit (8GB) DDR4-2933 CL17 SDRAM (Synchronous DRAM) 1Rx8, memory module, based on eight 1G x 8-bit FBGA components per module. Each module supports Intel Extreme Memory Profiles (Intel XMP) 2.0. Each module has been tested to run at DDR4-2933 at a low latency timing of 17-19-19 at 1.2V.

Other versions of this model

1 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

How do I install the 288-pin DIMM and what step do people get wrong?

Align the notch on the module with the key in the motherboard slot, press straight down until both side clips click, and verify the module sits flush; the common mistake is seating only one side so the opposite clip stays open.

What maintenance or replacement will this DDR4 module need later?

No scheduled maintenance is required; keep the heat spreader dust-free with occasional compressed air and replace the module only if memory errors appear or a capacity upgrade is desired.

What limit shows up first under sustained use on this CL17 2933 MHz kit?

The JEDEC-standard 1.20 V operating voltage and CL17-19-19 timings define the stable envelope; sustained loads will hit the rated frequency and latency ceiling before any thermal throttle occurs.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.