Δεχόμαστε κρυπτονομίσματα — έτσι ώστε αυτά που κατέχετε να μπορούν να αγοράσουν πραγματικό εξοπλισμό.Πληρώστε σε κρυπτονομίσματα, ξοδέψτε τα σε πραγματικό εξοπλισμό. Δωρεάν ασφαλισμένη αποστολή παγκοσμίως άνω των 399 $. Ουδέτερες κούτες αποστολής, χωρίς σήμανση, από τη Γερμανία.Δωρεάν ασφαλισμένη αποστολή άνω των 399 $. Η ισοτιμία σας κλειδώνει για 30 λεπτά μόλις ανοίξει το ταμείο.Κλείδωμα ισοτιμίας 30 λεπτών. Κάθε προϊόν είναι σφραγισμένο, ελεγμένο ως προς τον σειριακό αριθμό του, και καλύπτεται από εγγύηση 24 μηνών.Σφραγισμένο, με εγγύηση 24 μηνών.

Παρακολουθούμενα είδη Σύνδεση

HPE

HPE 763836-B21 1.60 TB internal solid state drive PCI Express 2.0 x8

SKU CH-K7XS-NMT9Y

1.60 TB PCIe 2.0 x8 solid-state drive for servers, delivering 2662.40 MB/s reads and 1024 MB/s writes with 0.5 DWPD endurance

  • 60 TB capacity stores large datasets
  • PCI Express 2.0 x8 interface enables high-speed data transfer
  • 40 MB/s maximum read rate accelerates data access
  • 68000 IOPS random 4KB read handles heavy workloads
  • 5 DWPD endurance rating supports write-intensive applications

HPE 763836-B21 1.60 TB PCIe Accelerator

This HPE Value Endurance drive adds 1.60 TB of flash storage through a PCI Express 2.0 x8 slot. It is built for ProLiant DL rack servers such as the DL160p Gen8 and DL180 G6 where low-latency access to active data sets matters.

Suits read-heavy workloads in supported ProLiant

The 0.5 DWPD endurance rating fits caching, boot and logging duties where writes stay moderate. Builds that need higher write endurance, a different form factor or servers outside the listed DL models should choose another device.

0.5 DWPD endurance rating

At 0.5 drive writes per day the drive sustains 1024 MB/s sequential write and 62000 random 4 KB write IOPS. That single figure tells you whether the endurance envelope matches your workload.

Βασικά χαρακτηριστικά

  • 60 TB capacity stores large datasets
  • PCI Express 2.0 x8 interface enables high-speed data transfer
  • 40 MB/s maximum read rate accelerates data access
  • 68000 IOPS random 4KB read handles heavy workloads
  • 5 DWPD endurance rating supports write-intensive applications

Προδιαγραφές

BrandHPE

Ερωτήσεις για αυτό το προϊόν

How much power does the 1.60 TB PCIe 2.0 x8 drive draw under sustained load?

The card is rated at 21 W typical for the Value Endurance workload profile.

What server slot and platform are required to install this half-height PCIe add-in card?

It needs a free PCI Express 2.0 x8 slot in a supported ProLiant DL rack server such as the DL160p Gen8 or DL180 G6.

Will the 1.60 TB accelerator work in a DL180 G6 that currently runs mechanical drives?

Yes, the drive is validated for the DL180 G6 and will operate alongside existing storage without interface conflicts.

Επίσης σε αυτό το ράφι

Οι πελάτες σύγκριναν και αυτά

Ίδιο ράφι, ίδιο ταμείο — οκτώ νομίσματα και κλείδωμα ισοτιμίας 30 λεπτών.