Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään

HPE

HPE 763836-B21 1.60 TB internal solid state drive PCI Express 2.0 x8

SKU CH-K7XS-NMT9Y

1.60 TB PCIe 2.0 x8 solid-state drive for servers, delivering 2662.40 MB/s reads and 1024 MB/s writes with 0.5 DWPD endurance

  • 60 TB capacity stores large datasets
  • PCI Express 2.0 x8 interface enables high-speed data transfer
  • 40 MB/s maximum read rate accelerates data access
  • 68000 IOPS random 4KB read handles heavy workloads
  • 5 DWPD endurance rating supports write-intensive applications

HPE 763836-B21 1.60 TB PCIe Accelerator

This HPE Value Endurance drive adds 1.60 TB of flash storage through a PCI Express 2.0 x8 slot. It is built for ProLiant DL rack servers such as the DL160p Gen8 and DL180 G6 where low-latency access to active data sets matters.

Suits read-heavy workloads in supported ProLiant

The 0.5 DWPD endurance rating fits caching, boot and logging duties where writes stay moderate. Builds that need higher write endurance, a different form factor or servers outside the listed DL models should choose another device.

0.5 DWPD endurance rating

At 0.5 drive writes per day the drive sustains 1024 MB/s sequential write and 62000 random 4 KB write IOPS. That single figure tells you whether the endurance envelope matches your workload.

Kohokohdat

  • 60 TB capacity stores large datasets
  • PCI Express 2.0 x8 interface enables high-speed data transfer
  • 40 MB/s maximum read rate accelerates data access
  • 68000 IOPS random 4KB read handles heavy workloads
  • 5 DWPD endurance rating supports write-intensive applications

Tekniset tiedot

BrandHPE

Kysymyksiä tästä tuotteesta

How much power does the 1.60 TB PCIe 2.0 x8 drive draw under sustained load?

The card is rated at 21 W typical for the Value Endurance workload profile.

What server slot and platform are required to install this half-height PCIe add-in card?

It needs a free PCI Express 2.0 x8 slot in a supported ProLiant DL rack server such as the DL160p Gen8 or DL180 G6.

Will the 1.60 TB accelerator work in a DL180 G6 that currently runs mechanical drives?

Yes, the drive is validated for the DL180 G6 and will operate alongside existing storage without interface conflicts.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.