Silver rectangular blade server with integrated drives and processors

HPE

HPE BL460c G10 Blade Server 2x Xeon Silver 4216 48GB DDR4 2x 4TB SATA

SKU CH-RRJM-Y8K17

Dual Xeon Silver 4216 blade server with 48GB DDR4 and two 4TB SATA drives for dense compute workloads

TypeBlade
CPU TypeIntel Xeon
CPU Speed2.1 GHz
# of Processors Installed2
MAX Processors2
Installed Memory Size48GB

Dual Xeon Silver 4216 processors provide 16 cores each at 2.1 GHz
48 GB DDR4 ECC registered memory supports demanding workloads
Two 4 TB SATA 2.5-inch drives offer high-capacity storage
Smart Array P204i-b SR Gen10 controller manages RAID configurations
Integrated iLO Advanced enables remote server management

6.586,99 $

0.08493205 BTC με τη σημερινή ισοτιμία

Διαθέσιμο · αποστολή σήμερα

Το ταμείο κλειδώνει την ισοτιμία σας για 30 λεπτά.

Παράδοση προς Ηνωμένες Πολιτείες εκτίμηση

UPS Worldwide Expedited 3–6 εργάσιμες ημέρες Δωρεάν
DHL Express Worldwide 2–3 εργάσιμες ημέρες 74,90 $

Οι εισαγωγικοί δασμοί επιβάλλονται κατά την άφιξη από τη χώρα σας.

Αποστολή αλλού

HPE BL460c G10 blade server for dense compute

The HPE BL460c G10 is a half-height blade server that fits into a c-Class enclosure. Two Xeon Silver 4216 processors deliver sixteen cores each at 2.1 GHz, and forty-eight gigabytes of DDR4 ECC registered memory support virtualisation and database workloads. Two 4TB SATA 2.5-inch drives provide bulk storage on the integrated Smart Array P204i-b SR controller.

Blade form factor with integrated remote management

The server installs directly into an HPE c-Class chassis, sharing power, cooling and fabric modules with neighbouring blades. A FlexFabric 20Gb two-port 650FLB adapter handles network connectivity through the enclosure interconnects. Integrated Lights-Out Advanced gives full remote console, power control and firmware update capability without physical access to the rack.

Thermals managed by shared enclosure cooling

The blade relies on the chassis fan wall for airflow, so acoustic output and thermal margins depend on the enclosure configuration and inlet temperature. Dual processors and the storage controller draw power from the shared mid-plane supply rails. Firmware and BIOS are updated to the latest stable release before shipment, and a full burn-in test verifies stable operation under load.

Βασικά χαρακτηριστικά

Dual Xeon Silver 4216 processors provide 16 cores each at 2.1 GHz
48 GB DDR4 ECC registered memory supports demanding workloads
Two 4 TB SATA 2.5-inch drives offer high-capacity storage
Smart Array P204i-b SR Gen10 controller manages RAID configurations
Integrated iLO Advanced enables remote server management

Προδιαγραφές

Brand	HP
Series	Proliant BL
Model	Blade
Type	Blade
CPU Type	Intel Xeon
CPU Speed	2.1 GHz
# of Processors Installed	2
MAX Processors	2
Installed Memory Size	48GB
Memory Type	DDR4 SDRAM
Max Memory Capacity	128GB
Hard Drive (Installed)	8,00
Storage Controller	HP Smart Array P204i-b SR Controller
HDD Interface	SATA
GPU Type	Integrated Graphics
Remote Management	Integrated Lights-Out (iLO) Advanced
Dimensions	22 x 22x 10 in
Weight	20

Ερωτήσεις για αυτό το προϊόν

What SATA interface does the Smart Array P204i-b SR controller use and what practical throughput cap should I expect?

The on-board Smart Array P204i-b SR controller connects the two 4 TB SATA 2.5" drives over a 6 Gb/s SATA link, so sustained throughput is limited to the SATA 6 Gb/s ceiling.

What physical clearance does the BL460c Gen10 blade need inside a c-Class enclosure?

The half-height blade measures 22 x 22 x 10 in and weighs 20 lb, so it occupies a single half-height bay in any HPE c-Class enclosure with the standard interconnect modules installed.

How is the blade seated in the enclosure and which step is most often missed?

Slide the blade into the empty half-height bay until the front latch clicks, then press the blue release lever to lock it; the step most often missed is engaging that lever so the blade is fully seated and powered.

Επίσης σε αυτό το ράφι