HighPoint Technologies, Inc.
HighPoint Technologies, Inc. SSD7540 8-Port NVMe RAID AIC
$1,749.99
0.02223226BTC
In stock
HPE
HPE BL460c G10 Blade Server 2x Xeon Silver 4216 48GB DDR4 2x 4TB SATA
Dual Xeon Silver 4216 blade server with 48GB DDR4 and two 4TB SATA drives for dense compute workloads
- TypeBlade
- CPU TypeIntel Xeon
- CPU Speed2.1 GHz
- # of Processors Installed2
- MAX Processors2
- Installed Memory Size48GB
- Dual Xeon Silver 4216 processors provide 16 cores each at 2.1 GHz
- 48 GB DDR4 ECC registered memory supports demanding workloads
- Two 4 TB SATA 2.5-inch drives offer high-capacity storage
- Smart Array P204i-b SR Gen10 controller manages RAID configurations
- Integrated iLO Advanced enables remote server management
HPE BL460c G10 blade server for dense compute
The HPE BL460c G10 is a half-height blade server that fits into a c-Class enclosure. Two Xeon Silver 4216 processors deliver sixteen cores each at 2.1 GHz, and forty-eight gigabytes of DDR4 ECC registered memory support virtualisation and database workloads. Two 4TB SATA 2.5-inch drives provide bulk storage on the integrated Smart Array P204i-b SR controller.
Blade form factor with integrated remote management
The server installs directly into an HPE c-Class chassis, sharing power, cooling and fabric modules with neighbouring blades. A FlexFabric 20Gb two-port 650FLB adapter handles network connectivity through the enclosure interconnects. Integrated Lights-Out Advanced gives full remote console, power control and firmware update capability without physical access to the rack.
Thermals managed by shared enclosure cooling
The blade relies on the chassis fan wall for airflow, so acoustic output and thermal margins depend on the enclosure configuration and inlet temperature. Dual processors and the storage controller draw power from the shared mid-plane supply rails. Firmware and BIOS are updated to the latest stable release before shipment, and a full burn-in test verifies stable operation under load.
Highlights
- Dual Xeon Silver 4216 processors provide 16 cores each at 2.1 GHz
- 48 GB DDR4 ECC registered memory supports demanding workloads
- Two 4 TB SATA 2.5-inch drives offer high-capacity storage
- Smart Array P204i-b SR Gen10 controller manages RAID configurations
- Integrated iLO Advanced enables remote server management
Specifications
| Brand | HP |
|---|---|
| Series | Proliant BL |
| Model | Blade |
| Type | Blade |
| CPU Type | Intel Xeon |
| CPU Speed | 2.1 GHz |
| # of Processors Installed | 2 |
| MAX Processors | 2 |
| Installed Memory Size | 48GB |
| Memory Type | DDR4 SDRAM |
| Max Memory Capacity | 128GB |
| Hard Drive (Installed) | 8,00 |
| Storage Controller | HP Smart Array P204i-b SR Controller |
| HDD Interface | SATA |
| GPU Type | Integrated Graphics |
| Remote Management | Integrated Lights-Out (iLO) Advanced |
| Dimensions | 22 x 22x 10 in |
| Weight | 20 |
Questions about this item
What SATA interface does the Smart Array P204i-b SR controller use and what practical throughput cap should I expect?
The on-board Smart Array P204i-b SR controller connects the two 4 TB SATA 2.5" drives over a 6 Gb/s SATA link, so sustained throughput is limited to the SATA 6 Gb/s ceiling.
What physical clearance does the BL460c Gen10 blade need inside a c-Class enclosure?
The half-height blade measures 22 x 22 x 10 in and weighs 20 lb, so it occupies a single half-height bay in any HPE c-Class enclosure with the standard interconnect modules installed.
How is the blade seated in the enclosure and which step is most often missed?
Slide the blade into the empty half-height bay until the front latch clicks, then press the blue release lever to lock it; the step most often missed is engaging that lever so the blade is fully seated and powered.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
HighPoint Technologies, Inc.
HighPoint Technologies, Inc. SSD7502 2-Port M.2 NVMe RAID Controller
$708.99
0.00900717BTC
In stock
