Silver 2U rack server, matte black front bezel, eight empty 2.5-inch drive bays, dual PSU vents, iLO port, sliding rail ends

HPE

HPE ProLiant DL380 Gen10 rack server 1x Xeon Silver 6130 2.1GHz 16C 256GB DDR4 no drives

SKU CH-MF99-J5DZA

Rack server with one 2.1 GHz 16-core Xeon, 256 GB DDR4, P408 SAS controller and dual 500 W supplies

TypeRack
CPU TypeIntel Xeon
CPU Speed2.1GHz
# of Processors Installed1
MAX Processors2
Installed Memory Size256GB

16-core Xeon Silver 6130 at 2.1 GHz for multi-threaded workloads
256 GB DDR4 ECC registered memory supports large datasets
Smart Array P408 SAS controller manages up to eight 2.5" drives
Dual 500 W flex-slot power supplies provide redundancy
HPE iLO Advanced enables remote firmware updates and monitoring

1.560,99 $

0.02018452 BTC με τη σημερινή ισοτιμία

Διαθέσιμο · αποστολή σήμερα

Το ταμείο κλειδώνει την ισοτιμία σας για 30 λεπτά.

Παράδοση προς Ηνωμένες Πολιτείες εκτίμηση

UPS Worldwide Expedited 3–6 εργάσιμες ημέρες Δωρεάν
DHL Express Worldwide 2–3 εργάσιμες ημέρες 74,90 $

Οι εισαγωγικοί δασμοί επιβάλλονται κατά την άφιξη από τη χώρα σας.

Αποστολή αλλού

Ready-to-configure 2U rack server

The HPE ProLiant DL380 Gen10 arrives with a single Xeon Silver 6130 processor running at 2.1 GHz and 16 cores. A full 256 GB of DDR4 ECC registered memory is already installed. No drives are fitted so you can populate up to eight 2.5 inch bays with the exact SATA or SAS capacity the workload demands.

Dual 500 W supplies and iLO control

Two hot-plug 500 W Flex Slot power supplies share the load and keep the system running if one unit fails. The integrated iLO Advanced remote-management engine lets you monitor thermals, power draw and firmware health from anywhere without adding a dedicated console.

Smart Array P408 plus 10 GbE networking

The onboard Smart Array P408 SAS controller handles RAID across the drive bays while a four-port Intel network card delivers two 10 GbE and two 1 GbE links. A second processor socket remains open for future expansion and the chassis supports up to 3 TB of total memory when the project grows.

Βασικά χαρακτηριστικά

16-core Xeon Silver 6130 at 2.1 GHz for multi-threaded workloads
256 GB DDR4 ECC registered memory supports large datasets
Smart Array P408 SAS controller manages up to eight 2.5" drives
Dual 500 W flex-slot power supplies provide redundancy
HPE iLO Advanced enables remote firmware updates and monitoring

Προδιαγραφές

Brand	HP
Series	ProLiant
Model	Rack Mount
Type	Rack
CPU Type	Intel Xeon
CPU Speed	2.1GHz
# of Processors Installed	1
MAX Processors	2
Installed Memory Size	256GB
Memory Type	DDR4
Max Memory Capacity	3TB
Hard Drive (Installed)	2,00
Storage Controller	HPE Smart Array P408 SAS Controller
HDD Interface	SATA
GPU Type	Integrated Graphics
Remote Management	HPE iLO Advanced
Dimensions	36 x 24 x 10 in
Weight	40

Ερωτήσεις για αυτό το προϊόν

How do I install the Xeon Silver 6130 processor in the DL380 Gen10, and which step is often missed?

Seat the single Xeon Silver 6130 in socket 1, apply the correct torque to the retention bracket, then install the matching heatsink; the step often missed is fitting the second heatsink blank when only one CPU is present.

What maintenance will the 256GB DDR4 memory and Smart Array P408 controller need later?

The DDR4 ECC registered modules require no scheduled replacement; the P408 controller’s flash-backed write cache uses a super-capacitor that typically lasts several years before it needs swapping.

What limit appears first when the server runs sustained heavy workloads?

The installed 256GB DDR4 capacity is reached well before the 3TB maximum, so memory bandwidth and capacity become the first bottleneck under sustained heavy compute.

Επίσης σε αυτό το ράφι