Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Silver 2U rack server, matte black front bezel, eight empty 2.5-inch drive bays, dual PSU vents, iLO port, sliding rail ends

HPE

HPE ProLiant DL380 Gen10 rack server 1x Xeon Silver 6130 2.1GHz 16C 256GB DDR4 no drives

SKU CH-MF99-J5DZA

Rack server with one 2.1 GHz 16-core Xeon, 256 GB DDR4, P408 SAS controller and dual 500 W supplies

  • TypeRack
  • CPU TypeIntel Xeon
  • CPU Speed2.1GHz
  • # of Processors Installed1
  • MAX Processors2
  • Installed Memory Size256GB
  • 16-core Xeon Silver 6130 at 2.1 GHz for multi-threaded workloads
  • 256 GB DDR4 ECC registered memory supports large datasets
  • Smart Array P408 SAS controller manages up to eight 2.5" drives
  • Dual 500 W flex-slot power supplies provide redundancy
  • HPE iLO Advanced enables remote firmware updates and monitoring

Ready-to-configure 2U rack server

The HPE ProLiant DL380 Gen10 arrives with a single Xeon Silver 6130 processor running at 2.1 GHz and 16 cores. A full 256 GB of DDR4 ECC registered memory is already installed. No drives are fitted so you can populate up to eight 2.5 inch bays with the exact SATA or SAS capacity the workload demands.

Dual 500 W supplies and iLO control

Two hot-plug 500 W Flex Slot power supplies share the load and keep the system running if one unit fails. The integrated iLO Advanced remote-management engine lets you monitor thermals, power draw and firmware health from anywhere without adding a dedicated console.

Smart Array P408 plus 10 GbE networking

The onboard Smart Array P408 SAS controller handles RAID across the drive bays while a four-port Intel network card delivers two 10 GbE and two 1 GbE links. A second processor socket remains open for future expansion and the chassis supports up to 3 TB of total memory when the project grows.

Kohokohdat

  • 16-core Xeon Silver 6130 at 2.1 GHz for multi-threaded workloads
  • 256 GB DDR4 ECC registered memory supports large datasets
  • Smart Array P408 SAS controller manages up to eight 2.5" drives
  • Dual 500 W flex-slot power supplies provide redundancy
  • HPE iLO Advanced enables remote firmware updates and monitoring

Tekniset tiedot

BrandHP
SeriesProLiant
ModelRack Mount
TypeRack
CPU TypeIntel Xeon
CPU Speed2.1GHz
# of Processors Installed1
MAX Processors2
Installed Memory Size256GB
Memory TypeDDR4
Max Memory Capacity3TB
Hard Drive (Installed)2,00
Storage ControllerHPE Smart Array P408 SAS Controller
HDD InterfaceSATA
GPU TypeIntegrated Graphics
Remote ManagementHPE iLO Advanced
Dimensions36 x 24 x 10 in
Weight40

Kysymyksiä tästä tuotteesta

How do I install the Xeon Silver 6130 processor in the DL380 Gen10, and which step is often missed?

Seat the single Xeon Silver 6130 in socket 1, apply the correct torque to the retention bracket, then install the matching heatsink; the step often missed is fitting the second heatsink blank when only one CPU is present.

What maintenance will the 256GB DDR4 memory and Smart Array P408 controller need later?

The DDR4 ECC registered modules require no scheduled replacement; the P408 controller’s flash-backed write cache uses a super-capacitor that typically lasts several years before it needs swapping.

What limit appears first when the server runs sustained heavy workloads?

The installed 256GB DDR4 capacity is reached well before the 3TB maximum, so memory bandwidth and capacity become the first bottleneck under sustained heavy compute.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.