IBM
IBM ST9500620SS 500GB 7.2K RPM 6Gb/s 2.5" SAS internal hard drive
A 500 GB, 7 200 RPM SAS hard drive in a 2.5-inch form factor with an included System X tray
- 500 GB capacity stores large datasets
- 7200 RPM spindle speed delivers responsive data access
- SAS 6 Gb/s interface provides reliable server connectivity
- 5 inch form factor fits dense drive bays
- Includes System X carrier tray for quick installation
IBM 500GB 2.5" SAS 6Gbps Drive
This IBM ST9500620SS is a 500GB 2.5-inch internal hard drive spinning at 7200RPM with a 6Gbps SAS interface. It ships new and includes the SYSTEM X carrier tray for direct installation in compatible bays. The drive targets servers and storage arrays that use 2.5-inch SAS slots.
Suits SAS Bays Only
The drive fits 2.5-inch bays wired for SAS 6Gbps and is designed for IBM System X platforms that accept the supplied tray. It will not work in enclosures that lack a SAS backplane or that require a different physical form factor. Buyers needing larger capacities or a different interface should consider other models.
6Gbps SAS Interface Decides Fit
The single specification that determines compatibility is the 6Gbps SAS interface on a 2.5-inch form factor. The host system must provide a matching SAS connector and backplane; any other interface will prevent the drive from functioning.
Βασικά χαρακτηριστικά
- 500 GB capacity stores large datasets
- 7200 RPM spindle speed delivers responsive data access
- SAS 6 Gb/s interface provides reliable server connectivity
- 5 inch form factor fits dense drive bays
- Includes System X carrier tray for quick installation
Προδιαγραφές
Δεν έχουν δημοσιευτεί ακόμη προδιαγραφές για αυτό το προϊόν.
Ερωτήσεις για αυτό το προϊόν
Will the 2.5" SAS drive and included SYSTEM X tray fit a standard 2.5" SAS hot-swap bay?
The drive is a 2.5" SAS 6Gbps unit and ships with the SYSTEM X carry tray, so it mounts directly into a compatible 2.5" SAS hot-swap bay.
What is the correct orientation when sliding the drive into the SYSTEM X tray before inserting it into the server?
Align the SAS connector end with the open side of the tray, press the drive firmly until the connector seats fully, then secure the tray latch.
How often should I run a surface scan on the 500GB 7200RPM SAS drive to catch early sector errors?
Schedule a monthly surface scan using the RAID controller or OS tools; replace the drive if reallocated sectors appear or SMART health drops below threshold.
Επίσης σε αυτό το ράφι
Οι πελάτες σύγκριναν και αυτά
Ίδιο ράφι, ίδιο ταμείο — οκτώ νομίσματα και κλείδωμα ισοτιμίας 30 λεπτών.



