暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
2.5 inch SAS hard drive with black metal casing and attached tray

IBM

IBM ST9500620SS 500GB 7.2K RPM 6Gb/s 2.5" SAS internal hard drive

SKU CH-SHPN-J9ND5

A 500 GB, 7 200 RPM SAS hard drive in a 2.5-inch form factor with an included System X tray

  • 500 GB capacity stores large datasets
  • 7200 RPM spindle speed delivers responsive data access
  • SAS 6 Gb/s interface provides reliable server connectivity
  • 5 inch form factor fits dense drive bays
  • Includes System X carrier tray for quick installation

IBM 500GB 2.5" SAS 6Gbps Drive

This IBM ST9500620SS is a 500GB 2.5-inch internal hard drive spinning at 7200RPM with a 6Gbps SAS interface. It ships new and includes the SYSTEM X carrier tray for direct installation in compatible bays. The drive targets servers and storage arrays that use 2.5-inch SAS slots.

Suits SAS Bays Only

The drive fits 2.5-inch bays wired for SAS 6Gbps and is designed for IBM System X platforms that accept the supplied tray. It will not work in enclosures that lack a SAS backplane or that require a different physical form factor. Buyers needing larger capacities or a different interface should consider other models.

6Gbps SAS Interface Decides Fit

The single specification that determines compatibility is the 6Gbps SAS interface on a 2.5-inch form factor. The host system must provide a matching SAS connector and backplane; any other interface will prevent the drive from functioning.

特長

  • 500 GB capacity stores large datasets
  • 7200 RPM spindle speed delivers responsive data access
  • SAS 6 Gb/s interface provides reliable server connectivity
  • 5 inch form factor fits dense drive bays
  • Includes System X carrier tray for quick installation

仕様

この商品の仕様はまだ公開されていません。

この商品に関する質問

Will the 2.5" SAS drive and included SYSTEM X tray fit a standard 2.5" SAS hot-swap bay?

The drive is a 2.5" SAS 6Gbps unit and ships with the SYSTEM X carry tray, so it mounts directly into a compatible 2.5" SAS hot-swap bay.

What is the correct orientation when sliding the drive into the SYSTEM X tray before inserting it into the server?

Align the SAS connector end with the open side of the tray, press the drive firmly until the connector seats fully, then secure the tray latch.

How often should I run a surface scan on the 500GB 7200RPM SAS drive to catch early sector errors?

Schedule a monthly surface scan using the RAID controller or OS tools; replace the drive if reallocated sectors appear or SMART health drops below threshold.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。