NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Δεχόμαστε κρυπτονομίσματα — έτσι ώστε αυτά που κατέχετε να μπορούν να αγοράσουν πραγματικό εξοπλισμό.Πληρώστε σε κρυπτονομίσματα, ξοδέψτε τα σε πραγματικό εξοπλισμό. Δωρεάν ασφαλισμένη αποστολή παγκοσμίως άνω των 399 $. Ουδέτερες κούτες αποστολής, χωρίς σήμανση, από τη Γερμανία.Δωρεάν ασφαλισμένη αποστολή άνω των 399 $. Η ισοτιμία σας κλειδώνει για 30 λεπτά μόλις ανοίξει το ταμείο.Κλείδωμα ισοτιμίας 30 λεπτών. Κάθε προϊόν είναι σφραγισμένο, ελεγμένο ως προς τον σειριακό αριθμό του, και καλύπτεται από εγγύηση 24 μηνών.Σφραγισμένο, με εγγύηση 24 μηνών.
KHACHIMO
Delivers 2000 W of 80 PLUS Gold ATX power with zero-RPM fan mode and Modern Standby support
The KHACHIMO NCS1K-2KW-AC is a 2000 watt ATX power supply built for systems that demand high continuous output. It carries 80 PLUS Gold certification for efficient power delivery and lower heat. Resonant LLC topology with DC-to-DC conversion provides clean, stable voltage rails. Modern Standby compatibility enables rapid wake-from-sleep transitions.
This unit suits builders assembling high-power workstations or servers that can use a 2000 watt ATX supply. The Zero RPM fan mode keeps acoustics low at light loads by stopping the fan completely. Buyers whose builds require less power or who are limited to smaller form-factor cases that cannot accommodate a standard ATX unit should consider other options.
The 80 PLUS Gold rating is the key specification that confirms high efficiency across typical load ranges, reducing wasted energy and operating temperature. This certification, combined with the LLC resonant design, supports the stable output required by demanding multi-GPU or compute configurations. Verify that your chassis and components are compatible with a 2000 watt ATX power supply before purchase.
| Type | ATX |
|---|
It follows the ATX form factor, so it fits standard ATX cases but its 2000W output requires a case with enough clearance for the unit's length and adequate airflow for high-wattage operation.
The unit needs a standard 24-pin ATX motherboard connector, an 8-pin (or 4+4) CPU power connector, and multiple PCIe 6+2-pin connectors for graphics cards, all of which must be present on the motherboard and GPU.
Secure the PSU to the rear of the case with four screws, orient the fan toward a ventilated panel, and remember to flip the external I/O power switch to the "on" position after wiring, otherwise the system will not start.
Επίσης σε αυτό το ράφι
Ίδιο ράφι, ίδιο ταμείο — οκτώ νομίσματα και κλείδωμα ισοτιμίας 30 λεπτών.
Το νόμισμα στο οποίο πληρώνετε, και αυτό στο οποίο βλέπετε τις τιμές.
Αποστέλλεται από το πορτοφόλι σας στο ταμείο
Μόνο για προβολή — ο κατάλογος αναγράφεται σε δολάρια
Κανένα νόμισμα δεν αντιστοιχεί.
Επιλέξτε τη γλώσσα στην οποία σας μιλάει ο ιστότοπος.
Πρώτη επίσκεψη;
Έχετε ήδη λογαριασμό;
Δεν υπάρχει αυτόματη επαναφορά κωδικού: αυτό το κατάστημα δεν στέλνει e-mail, άρα δεν υπάρχει σύνδεσμος μίας χρήσης να ζητήσετε. Αφήστε τη διεύθυνση στον λογαριασμό σας και κάποιος θα την επεξεργαστεί με το χέρι.
Το αίτημα καταχωρίστηκε
Δεν θα λάβετε τίποτα στα εισερχόμενά σας — το κατάστημα δεν στέλνει κανένα e-mail. Κάποιος το διαχειρίζεται με το χέρι.
Τον θυμηθήκατε;