Δεχόμαστε κρυπτονομίσματα — έτσι ώστε αυτά που κατέχετε να μπορούν να αγοράσουν πραγματικό εξοπλισμό.Πληρώστε σε κρυπτονομίσματα, ξοδέψτε τα σε πραγματικό εξοπλισμό. Δωρεάν ασφαλισμένη αποστολή παγκοσμίως άνω των 399 $. Ουδέτερες κούτες αποστολής, χωρίς σήμανση, από τη Γερμανία.Δωρεάν ασφαλισμένη αποστολή άνω των 399 $. Η ισοτιμία σας κλειδώνει για 30 λεπτά μόλις ανοίξει το ταμείο.Κλείδωμα ισοτιμίας 30 λεπτών. Κάθε προϊόν είναι σφραγισμένο, ελεγμένο ως προς τον σειριακό αριθμό του, και καλύπτεται από εγγύηση 24 μηνών.Σφραγισμένο, με εγγύηση 24 μηνών.

Παρακολουθούμενα είδη Σύνδεση

KHACHIMO

KHACHIMO DS20 DS25 500W Switching Power Supply API2FS01 30-10047-01

SKU CH-QWP0-D63CG

Delivers 500 W ATX power for DS20 and DS25 systems, verified working

  • TypeATX
  • Tested working for reliable operation
  • Good quality components for stable power delivery
  • 500W ATX output supports demanding builds
  • Compatible with DS20 and DS25 systems

500 W ATX supply for DS20/DS25

The KHACHIMO DS20 DS25 500W Switching Power Supply API2FS01 30-10047-01 is a new ATX unit rated at 500 W. It is built to power systems that use the DS20 or DS25 platform and require a standard ATX form factor. Each unit is test-worked before shipment so it arrives ready for installation. Buyers who need a different form factor or a higher wattage rating should look elsewhere.

Thermals noise and power draw

The supply draws up to 500 W from the wall under full load and converts it with typical switching efficiency. Fan speed ramps with internal temperature so acoustic output stays low during light workloads and rises only when the unit approaches its rated capacity. No liquid cooling or exotic thermal interfaces are involved. Builders who demand silent operation at sustained maximum output will need additional case airflow.

Βασικά χαρακτηριστικά

  • Tested working for reliable operation
  • Good quality components for stable power delivery
  • 500W ATX output supports demanding builds
  • Compatible with DS20 and DS25 systems

Προδιαγραφές

TypeATX

Ερωτήσεις για αυτό το προϊόν

How is the ATX 500W unit installed in a DS20 or DS25 chassis, and which step is most often missed?

Mount the supply in the ATX bay, secure it with the four chassis screws, then connect the 24-pin motherboard cable and the 4-pin CPU cable; the step most often missed is latching both power connectors until they click.

What maintenance or replacement will the DS20 DS25 500W switching supply need later?

Clean the intake fan vents every six months with compressed air; if the unit fails or outputs drift, replace the entire 500W ATX supply with another API2FS01 30-10047-01 unit.

Επίσης σε αυτό το ράφι

Οι πελάτες σύγκριναν και αυτά

Ίδιο ράφι, ίδιο ταμείο — οκτώ νομίσματα και κλείδωμα ισοτιμίας 30 λεπτών.