Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Rectangular silver ATX power supply unit with ventilation grille

KHACHIMO

KHACHIMO DS20 DS25 500W Switching Power Supply API2FS01 30-10047-01

SKU CH-QWP0-D63CG

Delivers 500 W ATX power for DS20 and DS25 systems, verified working

  • TypeATX
  • Tested working for reliable operation
  • Good quality components for stable power delivery
  • 500W ATX output supports demanding builds
  • Compatible with DS20 and DS25 systems

500 W ATX supply for DS20/DS25

The KHACHIMO DS20 DS25 500W Switching Power Supply API2FS01 30-10047-01 is a new ATX unit rated at 500 W. It is built to power systems that use the DS20 or DS25 platform and require a standard ATX form factor. Each unit is test-worked before shipment so it arrives ready for installation. Buyers who need a different form factor or a higher wattage rating should look elsewhere.

Thermals noise and power draw

The supply draws up to 500 W from the wall under full load and converts it with typical switching efficiency. Fan speed ramps with internal temperature so acoustic output stays low during light workloads and rises only when the unit approaches its rated capacity. No liquid cooling or exotic thermal interfaces are involved. Builders who demand silent operation at sustained maximum output will need additional case airflow.

Pluspunten

  • Tested working for reliable operation
  • Good quality components for stable power delivery
  • 500W ATX output supports demanding builds
  • Compatible with DS20 and DS25 systems

Specificaties

TypeATX

Vragen over dit artikel

How is the ATX 500W unit installed in a DS20 or DS25 chassis, and which step is most often missed?

Mount the supply in the ATX bay, secure it with the four chassis screws, then connect the 24-pin motherboard cable and the 4-pin CPU cable; the step most often missed is latching both power connectors until they click.

What maintenance or replacement will the DS20 DS25 500W switching supply need later?

Clean the intake fan vents every six months with compressed air; if the unit fails or outputs drift, replace the entire 500W ATX supply with another API2FS01 30-10047-01 unit.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.