Rectangular M.2 2280 SSD with black graphene heatsink covering the board

KINGSMAN GAMING

KINGSMAN GAMING S1000 M.2 2280 4TB PCIe 5.0x4 with DRAM CACHE and Heatsink internal SSD

SKU CH-QVW6-0K8WN

M.2 2280 4 TB internal SSD with PCIe 5.0 x4 interface, DRAM cache and graphene heatsink delivering up to 14000 MBps read and 13000 MBps write

Device TypeInternal Solid State Drive (SSD)
Used ForConsumer
Form FactorM.2 2280
Capacity4TB
Memory Components3D NAND TLC
InterfacePCI-Express 5.0 x4

Capacity 4TB

Up to 14,000 MB/s sequential read for ultra-fast load times
Up to 13,000 MB/s sequential write for rapid file transfers
Graphene heatsink keeps temperatures low up to 85 °C
DRAM cache and 3D NAND TLC deliver sustained performance
MTBF exceeds 1,000,000 hours for long-term reliability

595,99 $

0.00759707 BTC με τη σημερινή ισοτιμία

Διαθέσιμο · αποστολή σήμερα

Το ταμείο κλειδώνει την ισοτιμία σας για 30 λεπτά.

Παράδοση προς Ηνωμένες Πολιτείες εκτίμηση

UPS Worldwide Expedited 3–6 εργάσιμες ημέρες Δωρεάν
DHL Express Worldwide 2–3 εργάσιμες ημέρες 74,90 $

Οι εισαγωγικοί δασμοί επιβάλλονται κατά την άφιξη από τη χώρα σας.

Αποστολή αλλού

4 TB PCIe 5.0 x4 SSD for high-performance builds

The KINGSMAN GAMING S1000 delivers 4 TB of storage on an M.2 2280 form factor using PCIe 5.0 x4 and 3D NAND TLC. It targets enthusiasts and professionals who need fast sequential throughput for large workloads.

Graphene heatsink integrates

The included graphene heatsink dissipates heat directly into the board’s M.2 thermal solution, freeing internal airflow for other components. No extra mounting hardware or clearance planning is required beyond the standard slot.

Operates up to 85 °C with sustained speeds

Sequential reads reach up to 14000 MBps and writes up to 13000 MBps within the 0 °C to 85 °C range. The heatsink keeps the controller stable under load, limiting fan ramp and maintaining consistent power draw.

Βασικά χαρακτηριστικά

Up to 14,000 MB/s sequential read for ultra-fast load times
Up to 13,000 MB/s sequential write for rapid file transfers
Graphene heatsink keeps temperatures low up to 85 °C
DRAM cache and 3D NAND TLC deliver sustained performance
MTBF exceeds 1,000,000 hours for long-term reliability

Προδιαγραφές

Brand	KINGSMAN
Series	S1000
Model	KSS1KM4TB228
Device Type	Internal Solid State Drive (SSD)
Used For	Consumer
Form Factor	M.2 2280
Capacity	4TB
Memory Components	3D NAND TLC
Interface	PCI-Express 5.0 x4
Max Sequential Read	Up to 14000 MBps
Max Sequential Write	Up to 13000 MBps
MTBF	>1,000,000 hours
HeatSink	with HeatSink
Operating Temperature	0°C ~ +85°C

Άλλες εκδόσεις αυτού του μοντέλου

1 ακόμη στην ίδια σειρά

Ίδια οικογένεια, διαφορετική μνήμη, ψύκτρα ή συχνότητα — συγκρίνετε πριν αποφασίσετε.

KINGSMAN GAMING

KINGSMAN GAMING S1000 2TB M.2 2280 PCIe 5.0 x4 internal SSD with DRAM cache and heatsink

Internal Solid Stat…
Consumer

404,99 $

0.0051624BTC

Διαθέσιμο

Ερωτήσεις για αυτό το προϊόν

Will this M.2 2280 drive fit in a standard laptop or desktop slot?

Yes, the 2280 form factor matches the common M.2 2280 slot found in most modern laptops and desktops.

Does the included heatsink add enough height to block a motherboard cover or laptop chassis?

The graphene heatsink is designed for the M.2 2280 form factor and typically fits under standard motherboard shields and in most laptop bays.

What sustained speeds can I expect in real workloads versus the 14,000 MB/s read and 13,000 MB/s write peaks?

Peak sequential speeds reach 14,000 MB/s read and 13,000 MB/s write on a PCIe 5.0 x4 link; sustained throughput depends on workload, thermal headroom and controller firmware.

Επίσης σε αυτό το ράφι