Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Rectangular M.2 2280 SSD with black graphene heatsink covering the board

KINGSMAN GAMING

KINGSMAN GAMING S1000 M.2 2280 4TB PCIe 5.0x4 with DRAM CACHE and Heatsink internal SSD

SKU CH-QVW6-0K8WN

M.2 2280 4 TB internal SSD with PCIe 5.0 x4 interface, DRAM cache and graphene heatsink delivering up to 14000 MBps read and 13000 MBps write

  • Device TypeInternal Solid State Drive (SSD)
  • Used ForConsumer
  • Form FactorM.2 2280
  • Capacity4TB
  • Memory Components3D NAND TLC
  • InterfacePCI-Express 5.0 x4

Capacity 4TB

  • Up to 14,000 MB/s sequential read for ultra-fast load times
  • Up to 13,000 MB/s sequential write for rapid file transfers
  • Graphene heatsink keeps temperatures low up to 85 °C
  • DRAM cache and 3D NAND TLC deliver sustained performance
  • MTBF exceeds 1,000,000 hours for long-term reliability

4 TB PCIe 5.0 x4 SSD for high-performance builds

The KINGSMAN GAMING S1000 delivers 4 TB of storage on an M.2 2280 form factor using PCIe 5.0 x4 and 3D NAND TLC. It targets enthusiasts and professionals who need fast sequential throughput for large workloads.

Graphene heatsink integrates

The included graphene heatsink dissipates heat directly into the board’s M.2 thermal solution, freeing internal airflow for other components. No extra mounting hardware or clearance planning is required beyond the standard slot.

Operates up to 85 °C with sustained speeds

Sequential reads reach up to 14000 MBps and writes up to 13000 MBps within the 0 °C to 85 °C range. The heatsink keeps the controller stable under load, limiting fan ramp and maintaining consistent power draw.

Puncte forte

  • Up to 14,000 MB/s sequential read for ultra-fast load times
  • Up to 13,000 MB/s sequential write for rapid file transfers
  • Graphene heatsink keeps temperatures low up to 85 °C
  • DRAM cache and 3D NAND TLC deliver sustained performance
  • MTBF exceeds 1,000,000 hours for long-term reliability

Specificații

BrandKINGSMAN
SeriesS1000
ModelKSS1KM4TB228
Device TypeInternal Solid State Drive (SSD)
Used ForConsumer
Form FactorM.2 2280
Capacity4TB
Memory Components3D NAND TLC
InterfacePCI-Express 5.0 x4
Max Sequential ReadUp to 14000 MBps
Max Sequential WriteUp to 13000 MBps
MTBF>1,000,000 hours
HeatSinkwith HeatSink
Operating Temperature0°C ~ +85°C

Alte versiuni ale acestui model

1 în plus din aceeași gamă

Aceeași familie, memorie, radiator sau frecvență diferite — comparați înainte de a vă decide.

Întrebări despre acest articol

Will this M.2 2280 drive fit in a standard laptop or desktop slot?

Yes, the 2280 form factor matches the common M.2 2280 slot found in most modern laptops and desktops.

Does the included heatsink add enough height to block a motherboard cover or laptop chassis?

The graphene heatsink is designed for the M.2 2280 form factor and typically fits under standard motherboard shields and in most laptop bays.

What sustained speeds can I expect in real workloads versus the 14,000 MB/s read and 13,000 MB/s write peaks?

Peak sequential speeds reach 14,000 MB/s read and 13,000 MB/s write on a PCIe 5.0 x4 link; sustained throughput depends on workload, thermal headroom and controller firmware.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.