Δεχόμαστε κρυπτονομίσματα — έτσι ώστε αυτά που κατέχετε να μπορούν να αγοράσουν πραγματικό εξοπλισμό.Πληρώστε σε κρυπτονομίσματα, ξοδέψτε τα σε πραγματικό εξοπλισμό. Δωρεάν ασφαλισμένη αποστολή παγκοσμίως άνω των 399 $. Ουδέτερες κούτες αποστολής, χωρίς σήμανση, από τη Γερμανία.Δωρεάν ασφαλισμένη αποστολή άνω των 399 $. Η ισοτιμία σας κλειδώνει για 30 λεπτά μόλις ανοίξει το ταμείο.Κλείδωμα ισοτιμίας 30 λεπτών. Κάθε προϊόν είναι σφραγισμένο, ελεγμένο ως προς τον σειριακό αριθμό του, και καλύπτεται από εγγύηση 24 μηνών.Σφραγισμένο, με εγγύηση 24 μηνών.

Παρακολουθούμενα είδη Σύνδεση
Black rectangular DDR5 memory module with low-profile black heat spreader and gold edge contacts

Kingston Technology Corp.

Kingston Technology Corp. KF556C36BBE-32 32GB DDR5 5600 CL36 desktop RAM

SKU CH-W5CJ-ANZ3H MPN KF556C36BBE-32

32 GB dual-channel DDR5 kit at 5600 MT/s with CL36 timing, 1.25 V operation, Intel XMP 3.0 and AMD EXPO support, and a black heat spreader

  • Capacity32GB
  • Type288-Pin PC RAM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL36
  • Timing36-38-38-74
  • Voltage1.25V
  • 32 GB capacity supports demanding multitasking and gaming workloads
  • DDR5 5600 speed delivers high data throughput at PC5 44800
  • CL36 CAS latency with 36-38-38-74 timings provides responsive low-latency access
  • 25 V operating voltage enables efficient performance on Intel XMP 3.0 and AMD EXPO profiles
  • Black heat spreader on 288-pin DIMM aids thermal management during sustained loads

FURY Beast 32 GB DDR5 kit

This dual-channel kit delivers 32 GB of DDR5 memory rated at 5600 MT/s with CL36 latency. Each 288-pin DIMM operates at 1.25 V and includes a black heat spreader. The modules support Intel XMP 3.0 and AMD EXPO profiles for automatic overclocking. They are built for desktop platforms that accept DDR5 memory.

Suited for high-performance gaming

Builders who want a ready-tuned 32 GB kit with factory profiles for both major CPU platforms will benefit. Systems limited to 1.1 V JEDEC operation without XMP or EXPO support will not reach the rated 5600 speed. Buyers needing ECC or registered modules should look elsewhere.

5600 MT/s with CL36 timing

The decisive specification is the 5600 MT/s data rate combined with 36-38-38-74 timings at 1.25 V. This speed and latency pair determines whether the kit matches the motherboard’s supported memory profile and the builder’s performance target.

Βασικά χαρακτηριστικά

  • 32 GB capacity supports demanding multitasking and gaming workloads
  • DDR5 5600 speed delivers high data throughput at PC5 44800
  • CL36 CAS latency with 36-38-38-74 timings provides responsive low-latency access
  • 25 V operating voltage enables efficient performance on Intel XMP 3.0 and AMD EXPO profiles
  • Black heat spreader on 288-pin DIMM aids thermal management during sustained loads

Προδιαγραφές

BrandKingston
SeriesFURY Beast
ModelKF560C36BBEK2-32
Capacity32GB
Type288-Pin PC RAM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL36
Timing36-38-38-74
Voltage1.25V
ECCNo
Buffered/RegisteredUnbuffered / Unregistered
Multi-channel KitDual Channel Kit
BIOS/Performance ProfileIntel XMP 3.0 and AMD EXPO
ColorBlack
Heat SpreaderYes
FeaturesKingston FURY KF556C36BBE-32 is a 4G x 64-bit (32GB) DDR5-5600 CL36 SDRAM (Synchronous DRAM) 2Rx8, memory module, based on sixteen 2G x 8-bit FBGA components per module. The module supports AMD® EXPO v1.0 and Intel® Extreme Memory Profiles (Intel® XMP) 3.0. Each module has been tested to run at DDR5-5600 at a low latency timing of 36-38-38 at 1.25V. The SPDs are programmed to JEDEC standard latency DDR5-4800 timing of 40-39-39 at 1.1V. Each 288-pin DIMM uses gold contact fingers.
Recommend UseAMD & Intel Compatible / AMD 500 Series / AMD 600 Series / AMD B550 / AMD B650 / AMD Ryzen Compatible / AMD X570 / AMD X670 / High Performance or Gaming Memory / Intel 500 Series / Intel 600 Series / Intel 700 Series / Intel B660 / Intel B670 / Intel Compatible / Intel Z590 / Intel Z690 / Intel Z790
LED ColorNone
Βάρος αποστολής0.09 kg
Διαστάσεις συσκευασίας171 × 57 × 19 mm

Ερωτήσεις για αυτό το προϊόν

What JEDEC speed and voltage does the DDR5-5600 kit default to before XMP or EXPO is enabled?

The SPD is programmed to JEDEC standard DDR5-4800 at 1.1V with timings of 40-39-39.

How tall is the heat spreader on these 288-pin modules, and will it clear a large CPU cooler?

The black aluminium heat spreader adds roughly 44 mm height; check your cooler's RAM clearance spec to confirm fit.

Which slot pair should I populate first on a dual-channel board, and what BIOS step activates the rated 5600 MT/s?

Install the two modules in the same-colour slots (usually A2 and B2), then enable Intel XMP 3.0 or AMD EXPO in the BIOS to apply the 5600 profile.

Επίσης σε αυτό το ράφι

Οι πελάτες σύγκριναν και αυτά

Ίδιο ράφι, ίδιο ταμείο — οκτώ νομίσματα και κλείδωμα ισοτιμίας 30 λεπτών.