Akceptujemy kryptowaluty — posiadane środki można więc wykorzystać na zakup prawdziwego sprzętu.Płatność kryptowalutą — realny sprzęt w zamian. Bezpłatna, ubezpieczona dostawa na całym świecie powyżej 399 $. Neutralne kartony, bez oznaczeń, wysyłane z Niemiec.Bezpłatna, ubezpieczona dostawa powyżej 399 $. Kurs zostaje zablokowany na 30 minut od otwarcia kasy.Kurs zablokowany na 30 minut. Każdy produkt jest fabrycznie zapieczętowany, jego numer seryjny jest sprawdzany, a całość objęta jest 24-miesięczną gwarancją.Zapieczętowane fabrycznie, 24 miesiące gwarancji.

Obserwowane produkty Zaloguj się
Black rectangular DDR5 memory module with low-profile black heat spreader and gold edge contacts

Kingston Technology Corp.

Kingston Technology Corp. KF556C36BBE-32 32GB DDR5 5600 CL36 desktop RAM

SKU CH-W5CJ-ANZ3H MPN KF556C36BBE-32

32 GB dual-channel DDR5 kit at 5600 MT/s with CL36 timing, 1.25 V operation, Intel XMP 3.0 and AMD EXPO support, and a black heat spreader

  • Capacity32GB
  • Type288-Pin PC RAM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL36
  • Timing36-38-38-74
  • Voltage1.25V
  • 32 GB capacity supports demanding multitasking and gaming workloads
  • DDR5 5600 speed delivers high data throughput at PC5 44800
  • CL36 CAS latency with 36-38-38-74 timings provides responsive low-latency access
  • 25 V operating voltage enables efficient performance on Intel XMP 3.0 and AMD EXPO profiles
  • Black heat spreader on 288-pin DIMM aids thermal management during sustained loads

FURY Beast 32 GB DDR5 kit

This dual-channel kit delivers 32 GB of DDR5 memory rated at 5600 MT/s with CL36 latency. Each 288-pin DIMM operates at 1.25 V and includes a black heat spreader. The modules support Intel XMP 3.0 and AMD EXPO profiles for automatic overclocking. They are built for desktop platforms that accept DDR5 memory.

Suited for high-performance gaming

Builders who want a ready-tuned 32 GB kit with factory profiles for both major CPU platforms will benefit. Systems limited to 1.1 V JEDEC operation without XMP or EXPO support will not reach the rated 5600 speed. Buyers needing ECC or registered modules should look elsewhere.

5600 MT/s with CL36 timing

The decisive specification is the 5600 MT/s data rate combined with 36-38-38-74 timings at 1.25 V. This speed and latency pair determines whether the kit matches the motherboard’s supported memory profile and the builder’s performance target.

Najważniejsze cechy

  • 32 GB capacity supports demanding multitasking and gaming workloads
  • DDR5 5600 speed delivers high data throughput at PC5 44800
  • CL36 CAS latency with 36-38-38-74 timings provides responsive low-latency access
  • 25 V operating voltage enables efficient performance on Intel XMP 3.0 and AMD EXPO profiles
  • Black heat spreader on 288-pin DIMM aids thermal management during sustained loads

Specyfikacja

BrandKingston
SeriesFURY Beast
ModelKF560C36BBEK2-32
Capacity32GB
Type288-Pin PC RAM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL36
Timing36-38-38-74
Voltage1.25V
ECCNo
Buffered/RegisteredUnbuffered / Unregistered
Multi-channel KitDual Channel Kit
BIOS/Performance ProfileIntel XMP 3.0 and AMD EXPO
ColorBlack
Heat SpreaderYes
FeaturesKingston FURY KF556C36BBE-32 is a 4G x 64-bit (32GB) DDR5-5600 CL36 SDRAM (Synchronous DRAM) 2Rx8, memory module, based on sixteen 2G x 8-bit FBGA components per module. The module supports AMD® EXPO v1.0 and Intel® Extreme Memory Profiles (Intel® XMP) 3.0. Each module has been tested to run at DDR5-5600 at a low latency timing of 36-38-38 at 1.25V. The SPDs are programmed to JEDEC standard latency DDR5-4800 timing of 40-39-39 at 1.1V. Each 288-pin DIMM uses gold contact fingers.
Recommend UseAMD & Intel Compatible / AMD 500 Series / AMD 600 Series / AMD B550 / AMD B650 / AMD Ryzen Compatible / AMD X570 / AMD X670 / High Performance or Gaming Memory / Intel 500 Series / Intel 600 Series / Intel 700 Series / Intel B660 / Intel B670 / Intel Compatible / Intel Z590 / Intel Z690 / Intel Z790
LED ColorNone
Waga przesyłki0.09 kg
Wymiary opakowania171 × 57 × 19 mm

Pytania dotyczące tego produktu

What JEDEC speed and voltage does the DDR5-5600 kit default to before XMP or EXPO is enabled?

The SPD is programmed to JEDEC standard DDR5-4800 at 1.1V with timings of 40-39-39.

How tall is the heat spreader on these 288-pin modules, and will it clear a large CPU cooler?

The black aluminium heat spreader adds roughly 44 mm height; check your cooler's RAM clearance spec to confirm fit.

Which slot pair should I populate first on a dual-channel board, and what BIOS step activates the rated 5600 MT/s?

Install the two modules in the same-colour slots (usually A2 and B2), then enable Intel XMP 3.0 or AMD EXPO in the BIOS to apply the 5600 profile.

Także w tym dziale

Klienci porównywali też te produkty

Ten sam dział, ta sama kasa — osiem kryptowalut i 30-minutowa blokada kursu.