Two white rectangular outdoor wireless bridge units with integrated panel antennas and mounting hardware

KuWfi

KuWfi CPE80SR US 5.8G 900Mbps 2-Pack Wireless Bridge

SKU CH-T5E8-PG26D

Two 5.8 GHz wireless bridges deliver 900 Mbps point-to-point links up to 3 km with IP65 outdoor rating

StandardsIEEE 802.11ac/a
Security64/128-bit WEP security, 128bit WPA (TKIP/AES) security
WPAWPA
WAN Ports1 * 10/100Mbps RJ45 WAN Port
LAN Ports1 * 10/100Mbps RJ45 LAN Port
LEDsPWR(Power), WAN, LAN, Wi-Fi

8 GHz link reaches 900 Mbps for fast point-to-point throughput
IP65 rated enclosure withstands outdoor weather conditions
Built-in 11 dBi MIMO panel antenna focuses signal up to 3 km
24 V passive PoE simplifies single-cable power and data
Pair of units pre-configured for instant bridge deployment

51,99 $

0.00065536 BTC με τη σημερινή ισοτιμία

Διαθέσιμο · αποστολή σήμερα

Το ταμείο κλειδώνει την ισοτιμία σας για 30 λεπτά.

Παράδοση προς Ηνωμένες Πολιτείες εκτίμηση

UPS Worldwide Expedited 3–6 εργάσιμες ημέρες 39,90 $
DHL Express Worldwide 2–3 εργάσιμες ημέρες 74,90 $

Προσθέστε 347,01 $ ακόμη και η βασική αποστολή γίνεται δωρεάν.

Οι εισαγωγικοί δασμοί επιβάλλονται κατά την άφιξη από τη χώρα σας.

Αποστολή αλλού

KuWfi CPE80SR 5.8 GHz Bridge Kit

This KuWfi CPE80SR kit contains two outdoor wireless bridges operating on the 5.8 GHz band with a 900 Mbps PHY rate. Each unit integrates an 11 dBi MIMO panel antenna and an IP65-rated enclosure for point-to-point or point-to-multipoint links up to 2-3 km.

Installers needing a dedicated wireless link

The pair suits installers who need a transparent bridge between two fixed sites such as buildings, cameras or remote networks. It does not suit users who want a conventional access point for phone or laptop clients, or anyone requiring gigabit Ethernet ports.

10/100 Mbps Ethernet ports

Each bridge provides one 10/100 Mbps WAN port and one 10/100 Mbps LAN port, so wired throughput is limited to 100 Mbps. The link runs on 24 V passive PoE from the included injectors and is managed through a web interface.

Βασικά χαρακτηριστικά

8 GHz link reaches 900 Mbps for fast point-to-point throughput
IP65 rated enclosure withstands outdoor weather conditions
Built-in 11 dBi MIMO panel antenna focuses signal up to 3 km
24 V passive PoE simplifies single-cable power and data
Pair of units pre-configured for instant bridge deployment

Προδιαγραφές

Brand	KuWfi
Model	CPE80SR US
Standards	IEEE 802.11ac/a
Security	64/128-bit WEP security, 128bit WPA (TKIP/AES) security
WPA	WPA
WAN Ports	1 * 10/100Mbps RJ45 WAN Port
LAN Ports	1 * 10/100Mbps RJ45 LAN Port
LEDs	PWR(Power), WAN, LAN, Wi-Fi

Ερωτήσεις για αυτό το προϊόν

Does the 2-pack include everything needed to mount and power both bridges, or must I buy PoE injectors and cables separately?

The kit ships with two CPE units, two 24V 0.5A PoE power adapters, two 1-meter Ethernet cables and four metal mounting hoops with screws, so no extra power or mounting parts are required.

The listing shows a single CPE80SR US model — are there different capacity or antenna-gain versions I should choose between?

Only the CPE80SR US is offered; each unit has a built-in 11dBi MIMO panel antenna and identical 64MB RAM, 8MB flash and RTL8881AN chipset, so there are no alternative capacities or gain options to select.

The headline says 900Mbps — what real throughput can I expect over a 2-3km link with the 5.8GHz radios?

The 900Mbps figure is the maximum PHY rate under IEEE 802.11ac; actual throughput will be lower due to overhead, distance, interference and the 10/100Mbps Ethernet ports, which cap wired traffic at 100Mbps.

Επίσης σε αυτό το ράφι