Δεχόμαστε κρυπτονομίσματα — έτσι ώστε αυτά που κατέχετε να μπορούν να αγοράσουν πραγματικό εξοπλισμό.Πληρώστε σε κρυπτονομίσματα, ξοδέψτε τα σε πραγματικό εξοπλισμό. Δωρεάν ασφαλισμένη αποστολή παγκοσμίως άνω των 399 $. Ουδέτερες κούτες αποστολής, χωρίς σήμανση, από τη Γερμανία.Δωρεάν ασφαλισμένη αποστολή άνω των 399 $. Η ισοτιμία σας κλειδώνει για 30 λεπτά μόλις ανοίξει το ταμείο.Κλείδωμα ισοτιμίας 30 λεπτών. Κάθε προϊόν είναι σφραγισμένο, ελεγμένο ως προς τον σειριακό αριθμό του, και καλύπτεται από εγγύηση 24 μηνών.Σφραγισμένο, με εγγύηση 24 μηνών.

Παρακολουθούμενα είδη Σύνδεση
Green printed circuit board, gold edge connector, black label sticker, thin rectangular shape

Lexar

Lexar NM610 PRO 1TB M.2 2280 internal SSD

SKU CH-7QXG-2C4F2

PCIe 3.0 x4 NVMe drive delivering 2100 MB/s reads and 1600 MB/s writes in the M.2 2280 form factor

  • Device TypeInternal Solid State Drive (SSD)
  • Used ForConsumer
  • Form FactorM.2 2280
  • Capacity1TB
  • Memory Components3D TLC
  • InterfacePCI-Express 3.0 x4, NVMe

Options 1TB NM610 PRO

  • Fast boot and load times with 2100 MB/s read speed
  • Responsive multitasking from 1600 MB/s sequential write
  • Smooth random access at 188000 read IOPS
  • Durable 3D TLC flash rated for 250 TB written
  • Compact M.2 2280 form factor fits thin laptops

Lexar NM610 PRO 1TB M.2 2280 SSD

The Lexar NM610 PRO is a 1TB internal solid-state drive built on 3D TLC NAND. It connects through a PCI-Express 3.0 x4 lane using the NVMe 1.3 protocol and fits the M.2 2280 form factor. Sequential reads reach up to 2100 MBps and writes up to 1600 MBps. Random 4KB performance hits 188000 IOPS read and 156000 IOPS write. The drive is rated for 250TB total bytes written and a 1500000-hour MTBF.

Fits standard M.2 2280 slots with PCIe 3.0 x4 wiring

The single-sided 2.25mm profile sits in any M.2 2280 socket wired for PCI-Express 3.0 x4 and NVMe. No separate power or data cables are required. LDPC error correction helps maintain data integrity across the 3D TLC array. With no moving parts the drive withstands 1500G shock and 20G vibration across 10 to 2000 Hz. Operating range spans 0°C to 70°C and storage range reaches -40°C to 85°C.

Suits PC enthusiasts wanting faster boot

The NM610 PRO targets builders who need a straightforward NVMe upgrade over a SATA SSD. It delivers 3.5x the sequential throughput of typical SATA drives for OS, games and content libraries. Users requiring PCIe 4.0 or 5.0 bandwidth, higher endurance or sustained write workloads should consider drives specified for those tiers.

Βασικά χαρακτηριστικά

  • Fast boot and load times with 2100 MB/s read speed
  • Responsive multitasking from 1600 MB/s sequential write
  • Smooth random access at 188000 read IOPS
  • Durable 3D TLC flash rated for 250 TB written
  • Compact M.2 2280 form factor fits thin laptops

Προδιαγραφές

BrandLexar
SeriesNM610
ModelLNM610-500RBNA
Device TypeInternal Solid State Drive (SSD)
Used ForConsumer
Form FactorM.2 2280
Capacity1TB
Memory Components3D TLC
InterfacePCI-Express 3.0 x4, NVMe
Max Sequential ReadUp to 2100 MBps
Max Sequential WriteUp to 1600 MBps
4KB Random ReadUp to 188,000 IOPS
4KB Random WriteUp to 156,000 IOPS
MTBF1,500,000 hours
FeaturesTBW: 250TB
High-speed PCIe Gen3 x4 interface: 2100 MB/s read and 1600 MB/s write - NVMe 1.3 supported
M.2 2280 form factor
Get 3.5x the speed of a SATA-based SSD
Ideal for PC enthusiasts
3D NAND
Features LDPC (Low-Density Parity Check)
Shock and vibration resistant with no moving parts
Operating Temperature0°C ~ +70°C
Storage Temperature-40°C ~ +85°C
Max Shock Resistance1500G, duration 0.5 ms, Half Sine Wave
Max Vibration Resistance10~2000 Hz, 1.5mm, 20G, 1 Oct/min, 30 min/axis (X, Y, Z)
Height2.25mm
Width22.00mm
Depth80.00mm
Weight9.00g

Άλλες εκδόσεις αυτού του μοντέλου

2 ακόμη στην ίδια σειρά

Ίδια οικογένεια, διαφορετική μνήμη, ψύκτρα ή συχνότητα — συγκρίνετε πριν αποφασίσετε.

Ερωτήσεις για αυτό το προϊόν

When does the 250TB TBW rating become the limiting factor during sustained heavy writes?

The 250TB total bytes written rating is the endurance ceiling; once cumulative writes reach that figure the drive may enter read-only mode, so monitor SMART health under constant heavy workloads.

How much power does the PCIe 3.0 x4 NVMe 1.3 drive draw and how hot does it get under all-day load?

The drive operates between 0°C and 70°C with a 2.25mm single-sided profile; typical active power for this class stays under 5W, so a motherboard heatsink keeps temperatures in check during continuous use.

What motherboard slot and keying are required for the M.2 2280 PCIe 3.0 x4 NVMe 1.3 interface?

You need an M-keyed M.2 slot wired for PCIe 3.0 x4 (NVMe 1.3); a B-keyed or SATA-only slot will not work with this drive.

Επίσης σε αυτό το ράφι

Οι πελάτες σύγκριναν και αυτά

Ίδιο ράφι, ίδιο ταμείο — οκτώ νομίσματα και κλείδωμα ισοτιμίας 30 λεπτών.