Lexar
Lexar NM610 PRO 500GB M.2 2280 internal SSD
- Internal Solid Stat…
- Consumer
138,99 $
0.00174241BTC
Varastossa
Lexar
Lexar NM610 PRO 1TB M.2 2280 internal SSD
PCIe 3.0 x4 NVMe drive delivering 2100 MB/s reads and 1600 MB/s writes in the M.2 2280 form factor
- Device TypeInternal Solid State Drive (SSD)
- Used ForConsumer
- Form FactorM.2 2280
- Capacity1TB
- Memory Components3D TLC
- InterfacePCI-Express 3.0 x4, NVMe
Options 1TB NM610 PRO
- 2TB NM610 PRO
- 1TB NM610 PRO
- 500GB NM610 PRO
- Fast boot and load times with 2100 MB/s read speed
- Responsive multitasking from 1600 MB/s sequential write
- Smooth random access at 188000 read IOPS
- Durable 3D TLC flash rated for 250 TB written
- Compact M.2 2280 form factor fits thin laptops
Lexar NM610 PRO 1TB M.2 2280 SSD
The Lexar NM610 PRO is a 1TB internal solid-state drive built on 3D TLC NAND. It connects through a PCI-Express 3.0 x4 lane using the NVMe 1.3 protocol and fits the M.2 2280 form factor. Sequential reads reach up to 2100 MBps and writes up to 1600 MBps. Random 4KB performance hits 188000 IOPS read and 156000 IOPS write. The drive is rated for 250TB total bytes written and a 1500000-hour MTBF.
Fits standard M.2 2280 slots with PCIe 3.0 x4 wiring
The single-sided 2.25mm profile sits in any M.2 2280 socket wired for PCI-Express 3.0 x4 and NVMe. No separate power or data cables are required. LDPC error correction helps maintain data integrity across the 3D TLC array. With no moving parts the drive withstands 1500G shock and 20G vibration across 10 to 2000 Hz. Operating range spans 0°C to 70°C and storage range reaches -40°C to 85°C.
Suits PC enthusiasts wanting faster boot
The NM610 PRO targets builders who need a straightforward NVMe upgrade over a SATA SSD. It delivers 3.5x the sequential throughput of typical SATA drives for OS, games and content libraries. Users requiring PCIe 4.0 or 5.0 bandwidth, higher endurance or sustained write workloads should consider drives specified for those tiers.
Kohokohdat
- Fast boot and load times with 2100 MB/s read speed
- Responsive multitasking from 1600 MB/s sequential write
- Smooth random access at 188000 read IOPS
- Durable 3D TLC flash rated for 250 TB written
- Compact M.2 2280 form factor fits thin laptops
Tekniset tiedot
| Brand | Lexar |
|---|---|
| Series | NM610 |
| Model | LNM610-500RBNA |
| Device Type | Internal Solid State Drive (SSD) |
| Used For | Consumer |
| Form Factor | M.2 2280 |
| Capacity | 1TB |
| Memory Components | 3D TLC |
| Interface | PCI-Express 3.0 x4, NVMe |
| Max Sequential Read | Up to 2100 MBps |
| Max Sequential Write | Up to 1600 MBps |
| 4KB Random Read | Up to 188,000 IOPS |
| 4KB Random Write | Up to 156,000 IOPS |
| MTBF | 1,500,000 hours |
| Features | TBW: 250TB High-speed PCIe Gen3 x4 interface: 2100 MB/s read and 1600 MB/s write - NVMe 1.3 supported M.2 2280 form factor Get 3.5x the speed of a SATA-based SSD Ideal for PC enthusiasts 3D NAND Features LDPC (Low-Density Parity Check) Shock and vibration resistant with no moving parts |
| Operating Temperature | 0°C ~ +70°C |
| Storage Temperature | -40°C ~ +85°C |
| Max Shock Resistance | 1500G, duration 0.5 ms, Half Sine Wave |
| Max Vibration Resistance | 10~2000 Hz, 1.5mm, 20G, 1 Oct/min, 30 min/axis (X, Y, Z) |
| Height | 2.25mm |
| Width | 22.00mm |
| Depth | 80.00mm |
| Weight | 9.00g |
Tämän mallin muut versiot
2 lisää samasta mallistosta
Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.
Lexar
Lexar NM610 PRO 2TB M.2 2280 PCIe 3.0 x4 NVMe internal SSD
- Internal Solid Stat…
- Consumer
290,99 $
0.00364791BTC
VarastossaKysymyksiä tästä tuotteesta
When does the 250TB TBW rating become the limiting factor during sustained heavy writes?
The 250TB total bytes written rating is the endurance ceiling; once cumulative writes reach that figure the drive may enter read-only mode, so monitor SMART health under constant heavy workloads.
How much power does the PCIe 3.0 x4 NVMe 1.3 drive draw and how hot does it get under all-day load?
The drive operates between 0°C and 70°C with a 2.25mm single-sided profile; typical active power for this class stays under 5W, so a motherboard heatsink keeps temperatures in check during continuous use.
What motherboard slot and keying are required for the M.2 2280 PCIe 3.0 x4 NVMe 1.3 interface?
You need an M-keyed M.2 slot wired for PCIe 3.0 x4 (NVMe 1.3); a B-keyed or SATA-only slot will not work with this drive.
Myös tällä osastolla
Asiakkaat vertailivat myös näitä
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
