LONGER
LONGER Ray5 MiniS 3.5W Laser Engraver 130×140mm 12000mm/min 0.04mm Spot
- Laser Engraver
- Diode Laser
108,99 $
0.00140031BTC
Διαθέσιμο
LONGER
LONGER Ray5 MiniS 10W Laser Engraver 130×120mm 12000mm/min
A pre-assembled 10 W diode laser engraver with a 130 × 120 mm work area, 12 000 mm/min top speed and 0.06 mm spot size, plus full enclosure, door detection and emergency stop for safe desktop use
- TypeLaser Engraver
- TechnologyDiode Laser
- Work Area130*120mm
- Max Working Speed12000mm/min
- ColorBlack
Size RAY5 miniS 10W
- RAY5 miniS 3.5W
- RAY5 miniS 5.5W
- RAY5 miniS 10W
- Ready to use straight from the box with no assembly required
- 12000 mm/min engraving speed and 0.06 mm spot for fine detail
- Full enclosure with door detection and emergency stop for safer home use
- WiFi app control plus offline engraving without a computer
- Works with LightBurn, LaserGRBL and LaserBurn software
Ready-to-use desktop laser engraver
The LONGER Ray5 MiniS arrives fully assembled with a protective enclosure so beginners and hobbyists can start engraving wood, acrylic or leather immediately. Its 130 × 120 mm work area suits small DIY projects and light commercial batches without needing a dedicated workshop space.
Enclosed operation with safety interlocks
The full enclosure combines door detection and an emergency stop that halts the 10 W diode laser the moment the cover is opened. Fixed focus with a dovetail slot plate keeps the 0.06 × 0.06 mm compressed spot steady during normal desktop use.
Sustained high-speed engraving over Wi-Fi
At 12000 mm/min the engraver maintains throughput for longer runs while LightBurn, LaserGRBL or LaserBurn send jobs wirelessly. Offline engraving is also supported so the machine can complete extended tasks without a constant computer connection.
Βασικά χαρακτηριστικά
- Ready to use straight from the box with no assembly required
- 12000 mm/min engraving speed and 0.06 mm spot for fine detail
- Full enclosure with door detection and emergency stop for safer home use
- WiFi app control plus offline engraving without a computer
- Works with LightBurn, LaserGRBL and LaserBurn software
Προδιαγραφές
| Brand | LONGER |
|---|---|
| Model | Ray5 MiniS 10W |
| Type | Laser Engraver |
| Technology | Diode Laser |
| Work Area | 130*120mm |
| Max Working Speed | 12000mm/min |
| Color | Black |
Άλλες εκδόσεις αυτού του μοντέλου
2 ακόμη στην ίδια σειρά
Ίδια οικογένεια, διαφορετική μνήμη, ψύκτρα ή συχνότητα — συγκρίνετε πριν αποφασίσετε.
LONGER
LONGER Ray5 MiniS 5.5W Laser Engraver 130×120mm 12000mm/min
- Laser Engraver
- Diode Laser
152,99 $
0.00196562BTC
ΔιαθέσιμοΕρωτήσεις για αυτό το προϊόν
How do I set up the Ray5 MiniS 10W out of the box, and what alignment step do beginners often miss?
The machine arrives fully assembled; plug it in, connect via WiFi or USB, then use the fixed-focus dovetail plate to set the correct material height — skipping this height check is the most common reason for blurry first burns.
Which consumable part will need replacement after extended use on the Ray5 MiniS 10W?
The 450 nm diode laser module is the primary wear item; its output gradually declines after many hours, so plan to swap the module when engraving depth noticeably drops.
What is the first limitation I will hit during a long engraving session on the Ray5 MiniS 10W?
The 130 × 120 mm work area and fixed 0.06 mm spot size limit project size and detail resolution, while sustained high-speed runs at 12000 mm/min can trigger thermal throttling of the 10 W diode.
Επίσης σε αυτό το ράφι
Οι πελάτες σύγκριναν και αυτά
Ίδιο ράφι, ίδιο ταμείο — οκτώ νομίσματα και κλείδωμα ισοτιμίας 30 λεπτών.
