暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Black enclosed desktop laser engraver with viewing window and control panel

LONGER

LONGER Ray5 MiniS 10W Laser Engraver 130×120mm 12000mm/min

SKU CH-1SGC-BCD6A

A pre-assembled 10 W diode laser engraver with a 130 × 120 mm work area, 12 000 mm/min top speed and 0.06 mm spot size, plus full enclosure, door detection and emergency stop for safe desktop use

  • TypeLaser Engraver
  • TechnologyDiode Laser
  • Work Area130*120mm
  • Max Working Speed12000mm/min
  • ColorBlack

Size RAY5 miniS 10W

  • Ready to use straight from the box with no assembly required
  • 12000 mm/min engraving speed and 0.06 mm spot for fine detail
  • Full enclosure with door detection and emergency stop for safer home use
  • WiFi app control plus offline engraving without a computer
  • Works with LightBurn, LaserGRBL and LaserBurn software

Ready-to-use desktop laser engraver

The LONGER Ray5 MiniS arrives fully assembled with a protective enclosure so beginners and hobbyists can start engraving wood, acrylic or leather immediately. Its 130 × 120 mm work area suits small DIY projects and light commercial batches without needing a dedicated workshop space.

Enclosed operation with safety interlocks

The full enclosure combines door detection and an emergency stop that halts the 10 W diode laser the moment the cover is opened. Fixed focus with a dovetail slot plate keeps the 0.06 × 0.06 mm compressed spot steady during normal desktop use.

Sustained high-speed engraving over Wi-Fi

At 12000 mm/min the engraver maintains throughput for longer runs while LightBurn, LaserGRBL or LaserBurn send jobs wirelessly. Offline engraving is also supported so the machine can complete extended tasks without a constant computer connection.

特長

  • Ready to use straight from the box with no assembly required
  • 12000 mm/min engraving speed and 0.06 mm spot for fine detail
  • Full enclosure with door detection and emergency stop for safer home use
  • WiFi app control plus offline engraving without a computer
  • Works with LightBurn, LaserGRBL and LaserBurn software

仕様

BrandLONGER
ModelRay5 MiniS 10W
TypeLaser Engraver
TechnologyDiode Laser
Work Area130*120mm
Max Working Speed12000mm/min
ColorBlack

このモデルの他のバージョン

同シリーズにさらに 2点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

How do I set up the Ray5 MiniS 10W out of the box, and what alignment step do beginners often miss?

The machine arrives fully assembled; plug it in, connect via WiFi or USB, then use the fixed-focus dovetail plate to set the correct material height — skipping this height check is the most common reason for blurry first burns.

Which consumable part will need replacement after extended use on the Ray5 MiniS 10W?

The 450 nm diode laser module is the primary wear item; its output gradually declines after many hours, so plan to swap the module when engraving depth noticeably drops.

What is the first limitation I will hit during a long engraving session on the Ray5 MiniS 10W?

The 130 × 120 mm work area and fixed 0.06 mm spot size limit project size and detail resolution, while sustained high-speed runs at 12000 mm/min can trigger thermal throttling of the 10 W diode.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。