暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Black enclosed desktop laser engraver with acrylic cover and emergency stop button

LONGER

LONGER Ray5 MiniS 5.5W Laser Engraver 130×120mm 12000mm/min

SKU CH-9KC7-ESS31

A pre-assembled 5.5 W diode laser engraver with a 130 × 120 mm work area, 12 000 mm/min top speed, full acrylic enclosure, door detection and emergency stop for safe desktop use

  • TypeLaser Engraver
  • TechnologyDiode Laser
  • Work Area130*120mm
  • Max Working Speed12000mm/min
  • ColorBlack

Size RAY5 miniS 5.5W

  • Safe home use with full acrylic cover, door detection and emergency stop
  • Up to 12000 mm/min engraving speed with 32-bit motherboard
  • Precise 0.08 mm compressed laser spot for fine detail
  • Ready to use straight from the box with no assembly needed
  • Wireless app control plus offline engraving with LightBurn and LaserGRBL

What the Ray5 MiniS is and who it suits

The LONGER Ray5 MiniS is a pre-assembled 5.5W diode laser engraver with a 130×120mm work area and a full acrylic enclosure. It reaches 12000mm/min engraving speed using a 0.08mm compressed spot. Built-in door detection and an emergency stop button pause the laser instantly when the cover opens. Designed for beginners, home DIY and personalised gifts on wood, acrylic, leather and plastic.

Check your setup before ordering

Ensure you have a stable desktop space for the enclosed unit and a standard power outlet. The machine connects via WiFi for app control or runs offline, and supports LightBurn, LaserGRBL and LaserBurn software on Windows, macOS, iOS or Android. No assembly is required, but verify that your chosen materials fit within the 130×120mm bed and are compatible with a 450nm diode wavelength.

Behaviour under sustained load

The 32-bit motherboard maintains the 12000mm/min rate during extended jobs while the aluminum frame resists vibration. Fixed focus with a dovetail slot plate keeps the spot consistent over long runs. Safety systems — door detection, emergency stop and limit switches on both axes — remain active throughout, pausing operation instantly if the enclosure is opened or a limit is reached.

特長

  • Safe home use with full acrylic cover, door detection and emergency stop
  • Up to 12000 mm/min engraving speed with 32-bit motherboard
  • Precise 0.08 mm compressed laser spot for fine detail
  • Ready to use straight from the box with no assembly needed
  • Wireless app control plus offline engraving with LightBurn and LaserGRBL

仕様

BrandLONGER
ModelRay5 MiniS 5.5W
TypeLaser Engraver
TechnologyDiode Laser
Work Area130*120mm
Max Working Speed12000mm/min
ColorBlack

このモデルの他のバージョン

同シリーズにさらに 2点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

What comes in the box and is any accessory sold separately?

The Ray5 MiniS ships fully pre-assembled with its integrated acrylic protective cover, dovetail laser head, emergency-stop button and door-detection system already fitted. No extra parts are required to start engraving wood, acrylic, leather or plastic.

Which version should I choose for a 130×120 mm work area and 5.5 W diode laser?

This single model delivers the 5.5 W output, 450 ± 5 nm wavelength, 0.08 × 0.08 mm compressed spot and 130×120 mm engraving area. There are no alternative capacities or power levels to select.

What does the 12000 mm/min top speed mean for everyday engraving?

The 32-bit motherboard drives the laser head at up to 12000 mm/min, roughly 20 % faster than typical entry-level machines, so a 120 mm wide pass finishes noticeably quicker while the 0.08 mm spot keeps detail sharp.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。