LONGER
LONGER Ray5 MiniS 3.5W Laser Engraver 130×140mm 12000mm/min 0.04mm Spot
- Laser Engraver
- Diode Laser
108,99 $
0.00139819BTC
Krājumā
LONGER
LONGER Ray5 MiniS 5.5W Laser Engraver 130×120mm 12000mm/min
A pre-assembled 5.5 W diode laser engraver with a 130 × 120 mm work area, 12 000 mm/min top speed, full acrylic enclosure, door detection and emergency stop for safe desktop use
- TypeLaser Engraver
- TechnologyDiode Laser
- Work Area130*120mm
- Max Working Speed12000mm/min
- ColorBlack
Size RAY5 miniS 5.5W
- RAY5 miniS 3.5W
- RAY5 miniS 5.5W
- RAY5 miniS 10W
- Safe home use with full acrylic cover, door detection and emergency stop
- Up to 12000 mm/min engraving speed with 32-bit motherboard
- Precise 0.08 mm compressed laser spot for fine detail
- Ready to use straight from the box with no assembly needed
- Wireless app control plus offline engraving with LightBurn and LaserGRBL
What the Ray5 MiniS is and who it suits
The LONGER Ray5 MiniS is a pre-assembled 5.5W diode laser engraver with a 130×120mm work area and a full acrylic enclosure. It reaches 12000mm/min engraving speed using a 0.08mm compressed spot. Built-in door detection and an emergency stop button pause the laser instantly when the cover opens. Designed for beginners, home DIY and personalised gifts on wood, acrylic, leather and plastic.
Check your setup before ordering
Ensure you have a stable desktop space for the enclosed unit and a standard power outlet. The machine connects via WiFi for app control or runs offline, and supports LightBurn, LaserGRBL and LaserBurn software on Windows, macOS, iOS or Android. No assembly is required, but verify that your chosen materials fit within the 130×120mm bed and are compatible with a 450nm diode wavelength.
Behaviour under sustained load
The 32-bit motherboard maintains the 12000mm/min rate during extended jobs while the aluminum frame resists vibration. Fixed focus with a dovetail slot plate keeps the spot consistent over long runs. Safety systems — door detection, emergency stop and limit switches on both axes — remain active throughout, pausing operation instantly if the enclosure is opened or a limit is reached.
Priekšrocības
- Safe home use with full acrylic cover, door detection and emergency stop
- Up to 12000 mm/min engraving speed with 32-bit motherboard
- Precise 0.08 mm compressed laser spot for fine detail
- Ready to use straight from the box with no assembly needed
- Wireless app control plus offline engraving with LightBurn and LaserGRBL
Specifikācijas
| Brand | LONGER |
|---|---|
| Model | Ray5 MiniS 5.5W |
| Type | Laser Engraver |
| Technology | Diode Laser |
| Work Area | 130*120mm |
| Max Working Speed | 12000mm/min |
| Color | Black |
Citas šī modeļa versijas
Vēl 2 šajā sērijā
Viena saime, taču atšķirīga atmiņa, dzesētājs vai frekvence — salīdziniet, pirms izlemjat.
LONGER
LONGER Ray5 MiniS 10W Laser Engraver 130×120mm 12000mm/min
- Laser Engraver
- Diode Laser
189,99 $
0.0024373BTC
KrājumāJautājumi par šo preci
What comes in the box and is any accessory sold separately?
The Ray5 MiniS ships fully pre-assembled with its integrated acrylic protective cover, dovetail laser head, emergency-stop button and door-detection system already fitted. No extra parts are required to start engraving wood, acrylic, leather or plastic.
Which version should I choose for a 130×120 mm work area and 5.5 W diode laser?
This single model delivers the 5.5 W output, 450 ± 5 nm wavelength, 0.08 × 0.08 mm compressed spot and 130×120 mm engraving area. There are no alternative capacities or power levels to select.
What does the 12000 mm/min top speed mean for everyday engraving?
The 32-bit motherboard drives the laser head at up to 12000 mm/min, roughly 20 % faster than typical entry-level machines, so a 120 mm wide pass finishes noticeably quicker while the 0.08 mm spot keeps detail sharp.
Arī šajā sadaļā
Klienti arī salīdzināja
Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.
