Δεχόμαστε κρυπτονομίσματα — έτσι ώστε αυτά που κατέχετε να μπορούν να αγοράσουν πραγματικό εξοπλισμό.Πληρώστε σε κρυπτονομίσματα, ξοδέψτε τα σε πραγματικό εξοπλισμό. Δωρεάν ασφαλισμένη αποστολή παγκοσμίως άνω των 399 $. Ουδέτερες κούτες αποστολής, χωρίς σήμανση, από τη Γερμανία.Δωρεάν ασφαλισμένη αποστολή άνω των 399 $. Η ισοτιμία σας κλειδώνει για 30 λεπτά μόλις ανοίξει το ταμείο.Κλείδωμα ισοτιμίας 30 λεπτών. Κάθε προϊόν είναι σφραγισμένο, ελεγμένο ως προς τον σειριακό αριθμό του, και καλύπτεται από εγγύηση 24 μηνών.Σφραγισμένο, με εγγύηση 24 μηνών.

Παρακολουθούμενα είδη Σύνδεση

LORDWORLD

LORDWORLD EZConvert Ex MB931U-1VB R1 U.2 NVMe Adapter 10Gbps

SKU CH-HJJ7-K6TY4

Connects a U.2 NVMe SSD via USB 3.2 Gen 2 at 10Gbps, works with Thunderbolt 4 ports and accepts third-party drive trays

  • Fits Dell, HP, SuperMicro trays without a drive guider
  • Tool-less SSD installation with or without a drive tray
  • 10000-plus rated connector cycles for long-term durability
  • Up to 10Gbps transfer speed via USB 3.2 Gen 2
  • Thunderbolt 4 port compatible for versatile connectivity

U.2 NVMe adapter for third-party trays

The LORDWORLD EZConvert Ex MB931U-1VB R1 connects a single U.2 PCIe NVMe SSD to a host via USB 3.2 Gen 2. It is built for technicians and IT teams who need to read or write enterprise drives that ship in Dell, HP or SuperMicro caddies.

Tool-less install with tray or bare drive

The re-engineered chassis removes the fixed drive guider so third-party trays slide in directly. A 10,000-plus cycle connector handles frequent swaps and the tool-less latch secures the SSD whether a tray is present or not.

10 Gbps ceiling for PCIe NVMe

The USB 3.2 Gen 2 link caps sustained throughput at 10 Gbps, so the adapter saturates well before the fastest U.2 drives reach their own limits. It handles one drive at a time and does not support multi-drive arrays or RAID configurations.

Βασικά χαρακτηριστικά

  • Fits Dell, HP, SuperMicro trays without a drive guider
  • Tool-less SSD installation with or without a drive tray
  • 10000-plus rated connector cycles for long-term durability
  • Up to 10Gbps transfer speed via USB 3.2 Gen 2
  • Thunderbolt 4 port compatible for versatile connectivity

Προδιαγραφές

BrandLORDWORLD

Ερωτήσεις για αυτό το προϊόν

How can I confirm the EZConvert Ex MB931U-1VB R1 is delivering 10Gbps transfer speeds after connecting a U.2 NVMe SSD?

Connect the adapter via USB 3.2 Gen 2 or a Thunderbolt 4 port, then run a disk benchmark tool such as CrystalDiskMark; sustained sequential reads and writes approaching 10Gbps indicate the link is operating at full speed.

What cables are included with the MB931U-1VB R1 and do I need to purchase a U.2 NVMe SSD separately?

The package supplies both a USB-C and a USB-A cable for host connection; a U.2 PCIe NVMe SSD is not included and must be bought separately.

Which version of the EZConvert Ex adapter should I choose if my SSD uses a third-party caddy from Dell or HP?

The MB931U-1VB R1 is the only version listed; its re-engineered design removes the drive guider so it accepts third-party caddies from Dell, HP, SuperMicro and other manufacturers.

Επίσης σε αυτό το ράφι

Οι πελάτες σύγκριναν και αυτά

Ίδιο ράφι, ίδιο ταμείο — οκτώ νομίσματα και κλείδωμα ισοτιμίας 30 λεπτών.