Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Compact silver adapter block with USB-C port and U.2 NVMe slot

LORDWORLD

LORDWORLD EZConvert Ex MB931U-1VB R1 U.2 NVMe Adapter 10Gbps

SKU CH-HJJ7-K6TY4

Connects a U.2 NVMe SSD via USB 3.2 Gen 2 at 10Gbps, works with Thunderbolt 4 ports and accepts third-party drive trays

  • Fits Dell, HP, SuperMicro trays without a drive guider
  • Tool-less SSD installation with or without a drive tray
  • 10000-plus rated connector cycles for long-term durability
  • Up to 10Gbps transfer speed via USB 3.2 Gen 2
  • Thunderbolt 4 port compatible for versatile connectivity

U.2 NVMe adapter for third-party trays

The LORDWORLD EZConvert Ex MB931U-1VB R1 connects a single U.2 PCIe NVMe SSD to a host via USB 3.2 Gen 2. It is built for technicians and IT teams who need to read or write enterprise drives that ship in Dell, HP or SuperMicro caddies.

Tool-less install with tray or bare drive

The re-engineered chassis removes the fixed drive guider so third-party trays slide in directly. A 10,000-plus cycle connector handles frequent swaps and the tool-less latch secures the SSD whether a tray is present or not.

10 Gbps ceiling for PCIe NVMe

The USB 3.2 Gen 2 link caps sustained throughput at 10 Gbps, so the adapter saturates well before the fastest U.2 drives reach their own limits. It handles one drive at a time and does not support multi-drive arrays or RAID configurations.

Kohokohdat

  • Fits Dell, HP, SuperMicro trays without a drive guider
  • Tool-less SSD installation with or without a drive tray
  • 10000-plus rated connector cycles for long-term durability
  • Up to 10Gbps transfer speed via USB 3.2 Gen 2
  • Thunderbolt 4 port compatible for versatile connectivity

Tekniset tiedot

BrandLORDWORLD

Kysymyksiä tästä tuotteesta

How can I confirm the EZConvert Ex MB931U-1VB R1 is delivering 10Gbps transfer speeds after connecting a U.2 NVMe SSD?

Connect the adapter via USB 3.2 Gen 2 or a Thunderbolt 4 port, then run a disk benchmark tool such as CrystalDiskMark; sustained sequential reads and writes approaching 10Gbps indicate the link is operating at full speed.

What cables are included with the MB931U-1VB R1 and do I need to purchase a U.2 NVMe SSD separately?

The package supplies both a USB-C and a USB-A cable for host connection; a U.2 PCIe NVMe SSD is not included and must be bought separately.

Which version of the EZConvert Ex adapter should I choose if my SSD uses a third-party caddy from Dell or HP?

The MB931U-1VB R1 is the only version listed; its re-engineered design removes the drive guider so it accepts third-party caddies from Dell, HP, SuperMicro and other manufacturers.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.