Δεχόμαστε κρυπτονομίσματα — έτσι ώστε αυτά που κατέχετε να μπορούν να αγοράσουν πραγματικό εξοπλισμό.Πληρώστε σε κρυπτονομίσματα, ξοδέψτε τα σε πραγματικό εξοπλισμό. Δωρεάν ασφαλισμένη αποστολή παγκοσμίως άνω των 399 $. Ουδέτερες κούτες αποστολής, χωρίς σήμανση, από τη Γερμανία.Δωρεάν ασφαλισμένη αποστολή άνω των 399 $. Η ισοτιμία σας κλειδώνει για 30 λεπτά μόλις ανοίξει το ταμείο.Κλείδωμα ισοτιμίας 30 λεπτών. Κάθε προϊόν είναι σφραγισμένο, ελεγμένο ως προς τον σειριακό αριθμό του, και καλύπτεται από εγγύηση 24 μηνών.Σφραγισμένο, με εγγύηση 24 μηνών.

Παρακολουθούμενα είδη Σύνδεση
Three textured build plates for Replicator Mini+

MakerBot

MakerBot Grip Surface 112048-00 for Replicator Mini+ 3-Pack 3D Printers Accessories

SKU CH-YTMB-4GJEQ

Three Grip Surface sheets for the Replicator Mini+ that improve print adhesion and reduce warping and curling

  • Better adhesion for reliable first layers with the Replicator Mini+
  • Reduced warping and curling keeps prints flat during cooling
  • Three sheets in one pack provide spare build surfaces
  • Designed specifically for the MakerBot Mini+ platform
  • New condition ensures clean, uncontaminated print surfaces

Grip Surface 3-Pack for Replicator Mini+

This three-pack supplies replacement grip surface sheets made for the MakerBot Replicator Mini+. Each sheet installs on the build plate to improve first-layer adhesion during printing. The set gives you spares so you can swap a worn mat without pausing a project.

Makers who need reliable bed adhesion on a Mini+

The sheets suit hobbyists and educators running a Replicator Mini+ who want consistent prints with less warping or curling. Users of other printer models or those who prefer alternative build surfaces such as PEI or glass should look at different solutions.

Three sheets provide several print cycles

With three mats in the pack you can rotate them between jobs and replace one when adhesion drops. The surface handles typical PLA prints on the Mini+ build volume; very large or high-temperature materials may exceed its grip capability.

Βασικά χαρακτηριστικά

  • Better adhesion for reliable first layers with the Replicator Mini+
  • Reduced warping and curling keeps prints flat during cooling
  • Three sheets in one pack provide spare build surfaces
  • Designed specifically for the MakerBot Mini+ platform
  • New condition ensures clean, uncontaminated print surfaces

Προδιαγραφές

BrandMakerbot
Model112048-00

Ερωτήσεις για αυτό το προϊόν

Which printer must I already own for the 112048-00 Grip Surface sheets to fit?

The sheets are made for the Replicator Mini+ build plate, so you need that printer model for them to work.

Will these sheets still adhere properly if I keep using the original build plate that came with my Replicator Mini+?

Yes, each sheet is designed to sit on the existing build plate of the Replicator Mini+ and improves adhesion without replacing the plate.

How can I confirm the 112048-00 Grip Surface is performing correctly after I install a sheet?

Prints should stick firmly during the build and show noticeably less warping or curling at the edges when finished.

Επίσης σε αυτό το ράφι

Οι πελάτες σύγκριναν και αυτά

Ίδιο ράφι, ίδιο ταμείο — οκτώ νομίσματα και κλείδωμα ισοτιμίας 30 λεπτών.