暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Three textured build plates for Replicator Mini+

MakerBot

MakerBot Grip Surface 112048-00 for Replicator Mini+ 3-Pack 3D Printers Accessories

SKU CH-YTMB-4GJEQ

Three Grip Surface sheets for the Replicator Mini+ that improve print adhesion and reduce warping and curling

  • Better adhesion for reliable first layers with the Replicator Mini+
  • Reduced warping and curling keeps prints flat during cooling
  • Three sheets in one pack provide spare build surfaces
  • Designed specifically for the MakerBot Mini+ platform
  • New condition ensures clean, uncontaminated print surfaces

Grip Surface 3-Pack for Replicator Mini+

This three-pack supplies replacement grip surface sheets made for the MakerBot Replicator Mini+. Each sheet installs on the build plate to improve first-layer adhesion during printing. The set gives you spares so you can swap a worn mat without pausing a project.

Makers who need reliable bed adhesion on a Mini+

The sheets suit hobbyists and educators running a Replicator Mini+ who want consistent prints with less warping or curling. Users of other printer models or those who prefer alternative build surfaces such as PEI or glass should look at different solutions.

Three sheets provide several print cycles

With three mats in the pack you can rotate them between jobs and replace one when adhesion drops. The surface handles typical PLA prints on the Mini+ build volume; very large or high-temperature materials may exceed its grip capability.

特長

  • Better adhesion for reliable first layers with the Replicator Mini+
  • Reduced warping and curling keeps prints flat during cooling
  • Three sheets in one pack provide spare build surfaces
  • Designed specifically for the MakerBot Mini+ platform
  • New condition ensures clean, uncontaminated print surfaces

仕様

BrandMakerbot
Model112048-00

この商品に関する質問

Which printer must I already own for the 112048-00 Grip Surface sheets to fit?

The sheets are made for the Replicator Mini+ build plate, so you need that printer model for them to work.

Will these sheets still adhere properly if I keep using the original build plate that came with my Replicator Mini+?

Yes, each sheet is designed to sit on the existing build plate of the Replicator Mini+ and improves adhesion without replacing the plate.

How can I confirm the 112048-00 Grip Surface is performing correctly after I install a sheet?

Prints should stick firmly during the build and show noticeably less warping or curling at the edges when finished.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。