Δεχόμαστε κρυπτονομίσματα — έτσι ώστε αυτά που κατέχετε να μπορούν να αγοράσουν πραγματικό εξοπλισμό.Πληρώστε σε κρυπτονομίσματα, ξοδέψτε τα σε πραγματικό εξοπλισμό. Δωρεάν ασφαλισμένη αποστολή παγκοσμίως άνω των 399 $. Ουδέτερες κούτες αποστολής, χωρίς σήμανση, από τη Γερμανία.Δωρεάν ασφαλισμένη αποστολή άνω των 399 $. Η ισοτιμία σας κλειδώνει για 30 λεπτά μόλις ανοίξει το ταμείο.Κλείδωμα ισοτιμίας 30 λεπτών. Κάθε προϊόν είναι σφραγισμένο, ελεγμένο ως προς τον σειριακό αριθμό του, και καλύπτεται από εγγύηση 24 μηνών.Σφραγισμένο, με εγγύηση 24 μηνών.

Παρακολουθούμενα είδη Σύνδεση
Two black rectangular PVC mesh sheets with magnetic strips, each 400 by 300 millimetres, cut-to-size design

MoKo MKCCP220024 400x300mm Cut-to-size Magnetic PVC Fan Filter 2 PCS

SKU CH-CXV1-CX68D MPN MKCCP220024

Cut-to-size magnetic PVC mesh filters dust while maintaining airflow for PC cases and consoles

  • certificationtrue
  • features2 x 400*300mm-1mm hole
  • includedP723314078403
  • weight8.1 ounces
  • dimensions15.75 in x 11.81 in x 0.01 in
  • materialPolyvinyl Chloride
  • Cut-to-size design fits custom case openings
  • Magnetic strips attach without drilling for quick removal
  • 1 mm mesh holes block dust while maintaining airflow
  • PVC material resists wear and cleans with water
  • Two 400 × 300 mm filters and eight strips included

DIY Cut-to-Size Magnetic Filter

This MoKo MKCCP220024 kit provides two 400x300mm PVC mesh sheets with 1mm holes and eight 400mm magnetic strips. It is intended for PC builders who want a custom-fit dust barrier for any case intake or exhaust opening without drilling holes. The material also suits speaker grilles, game consoles and other electronics that need airflow with dust protection.

Replaces Fixed-Size Filter Kits

Unlike pre-cut filters that only match standard 120mm, 140mm, 240mm or 280mm fan mounts, these oversized sheets let you trim the exact rectangle your chassis requires. The upgrade is worth it when your case uses non-standard vent dimensions or when you want a single filter covering multiple adjacent fan positions.

Tool-Free Magnetic Installation

Peel the 3M adhesive backing on each magnetic strip, stick them to the cut mesh edges, then snap the assembly onto the ferrous case frame. No screws or rivets are needed, so removal for cleaning takes seconds. The only common issue is ensuring the case panel is steel; aluminium or plastic fronts will not hold the magnets.

Βασικά χαρακτηριστικά

  • Cut-to-size design fits custom case openings
  • Magnetic strips attach without drilling for quick removal
  • 1 mm mesh holes block dust while maintaining airflow
  • PVC material resists wear and cleans with water
  • Two 400 × 300 mm filters and eight strips included

Προδιαγραφές

BrandMoKo
ModelMKCCP220024
certificationtrue
features2 x 400*300mm-1mm hole
includedP723314078403
weight8.1 ounces
dimensions15.75 in x 11.81 in x 0.01 in
materialPolyvinyl Chloride

Ερωτήσεις για αυτό το προϊόν

How much space do the 400mm magnetic strips need along the case frame?

Each strip is 400mm long, so the iron mounting surface must provide at least 400mm of continuous flat area per side; the mesh itself measures 400mm by 300mm.

What is the correct order for attaching the 3M-backed magnetic strips so they align with the cut mesh?

Measure and cut the PVC mesh first, then peel the 3M liner from each 400mm strip and press it onto the mesh edge; finally press the assembly onto the ferrous case frame.

How should the 1mm-hole PVC mesh be cleaned without damaging the magnetic strips?

Remove the mesh from the case, detach the magnetic strips if possible, then wash the PVC with water and mild soap; let it dry completely before re-attaching the strips.

Επίσης σε αυτό το ράφι

Οι πελάτες σύγκριναν και αυτά

Ίδιο ράφι, ίδιο ταμείο — οκτώ νομίσματα και κλείδωμα ισοτιμίας 30 λεπτών.