暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Two black rectangular PVC mesh sheets with magnetic strips, each 400 by 300 millimetres, cut-to-size design

MoKo MKCCP220024 400x300mm Cut-to-size Magnetic PVC Fan Filter 2 PCS

SKU CH-CXV1-CX68D MPN MKCCP220024

Cut-to-size magnetic PVC mesh filters dust while maintaining airflow for PC cases and consoles

  • certificationtrue
  • features2 x 400*300mm-1mm hole
  • includedP723314078403
  • weight8.1 ounces
  • dimensions15.75 in x 11.81 in x 0.01 in
  • materialPolyvinyl Chloride
  • Cut-to-size design fits custom case openings
  • Magnetic strips attach without drilling for quick removal
  • 1 mm mesh holes block dust while maintaining airflow
  • PVC material resists wear and cleans with water
  • Two 400 × 300 mm filters and eight strips included

DIY Cut-to-Size Magnetic Filter

This MoKo MKCCP220024 kit provides two 400x300mm PVC mesh sheets with 1mm holes and eight 400mm magnetic strips. It is intended for PC builders who want a custom-fit dust barrier for any case intake or exhaust opening without drilling holes. The material also suits speaker grilles, game consoles and other electronics that need airflow with dust protection.

Replaces Fixed-Size Filter Kits

Unlike pre-cut filters that only match standard 120mm, 140mm, 240mm or 280mm fan mounts, these oversized sheets let you trim the exact rectangle your chassis requires. The upgrade is worth it when your case uses non-standard vent dimensions or when you want a single filter covering multiple adjacent fan positions.

Tool-Free Magnetic Installation

Peel the 3M adhesive backing on each magnetic strip, stick them to the cut mesh edges, then snap the assembly onto the ferrous case frame. No screws or rivets are needed, so removal for cleaning takes seconds. The only common issue is ensuring the case panel is steel; aluminium or plastic fronts will not hold the magnets.

特長

  • Cut-to-size design fits custom case openings
  • Magnetic strips attach without drilling for quick removal
  • 1 mm mesh holes block dust while maintaining airflow
  • PVC material resists wear and cleans with water
  • Two 400 × 300 mm filters and eight strips included

仕様

BrandMoKo
ModelMKCCP220024
certificationtrue
features2 x 400*300mm-1mm hole
includedP723314078403
weight8.1 ounces
dimensions15.75 in x 11.81 in x 0.01 in
materialPolyvinyl Chloride

この商品に関する質問

How much space do the 400mm magnetic strips need along the case frame?

Each strip is 400mm long, so the iron mounting surface must provide at least 400mm of continuous flat area per side; the mesh itself measures 400mm by 300mm.

What is the correct order for attaching the 3M-backed magnetic strips so they align with the cut mesh?

Measure and cut the PVC mesh first, then peel the 3M liner from each 400mm strip and press it onto the mesh edge; finally press the assembly onto the ferrous case frame.

How should the 1mm-hole PVC mesh be cleaned without damaging the magnetic strips?

Remove the mesh from the case, detach the magnetic strips if possible, then wash the PVC with water and mild soap; let it dry completely before re-attaching the strips.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。