BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 $
0.00276732BTC
Διαθέσιμο
myVolts
myVolts ADP-200ER 4 Pin Power Supply for PS4 CUH-1215A CUH-12XX
Replacement 4-pin PSU for PS4 CUH-1215A and CUH-12XX models, accepting 100-240 V AC at 50/60 Hz and delivering 12 V and 4.8 V DC
- TypeAT
- Direct replacement for PS4 CUH-1215A and CUH-12XX consoles
- Worldwide AC input 100-240V at 50/60Hz for travel
- Delivers stable +12V and +4.8V DC rails to the system
- Four-pin connector matches the original motherboard header exactly
- Unit is fully tested before dispatch for reliable operation
Replacement PSU for PS4 CUH-12XX
This 4-pin power supply replaces the original ADP-200ER unit in Sony PlayStation 4 consoles carrying the CUH-1215A or CUH-12XX model codes. It is built as a direct swap for a failed or noisy internal brick. The part is not suitable for earlier or later PS4 revisions that use a different pin layout or form factor.
AT-type unit with 100-240 V input
The supply accepts AC mains from 100 to 240 volts at 2.5 amps across 50 or 60 Hz, so it works on household power worldwide without a voltage switch. A fixed 4-pin connector plugs straight into the console’s mainboard, eliminating cable adapters. Build quality targets the same fit and finish as the factory component.
Single 12 V rail at 4.8 A
The only output rail delivers 12 volts at 4.8 amps, which is the exact current the CUH-12XX motherboard expects. If your console needs a different voltage combination or a higher 12 V current rating, this unit will not meet the requirement. Verify the model stamp on your original supply before ordering.
Βασικά χαρακτηριστικά
- Direct replacement for PS4 CUH-1215A and CUH-12XX consoles
- Worldwide AC input 100-240V at 50/60Hz for travel
- Delivers stable +12V and +4.8V DC rails to the system
- Four-pin connector matches the original motherboard header exactly
- Unit is fully tested before dispatch for reliable operation
Προδιαγραφές
| Type | AT |
|---|
Ερωτήσεις για αυτό το προϊόν
What AC input range and frequency does the ADP-200ER accept?
The unit accepts 100 to 240 volts at 50 or 60 Hz with a 2.5 amp draw.
Which PlayStation 4 models does the 4-pin ADP-200ER fit?
It fits the CUH-1215A and CUH-12XX series consoles that use a 4-pin power cable.
How do I install the ADP-200ER and what step is often missed?
Open the console, disconnect the old 4-pin connector, fit the new unit, and ensure the 4-pin plug seats fully before reassembly.
Επίσης σε αυτό το ράφι
Οι πελάτες σύγκριναν και αυτά
Ίδιο ράφι, ίδιο ταμείο — οκτώ νομίσματα και κλείδωμα ισοτιμίας 30 λεπτών.
