暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Rectangular black power supply unit with 4-pin connector for PS4 CUH-12XX

myVolts

myVolts ADP-200ER 4 Pin Power Supply for PS4 CUH-1215A CUH-12XX

SKU CH-RT2K-4JTTY MPN ADP-200ER

Replacement 4-pin PSU for PS4 CUH-1215A and CUH-12XX models, accepting 100-240 V AC at 50/60 Hz and delivering 12 V and 4.8 V DC

  • TypeAT
  • Direct replacement for PS4 CUH-1215A and CUH-12XX consoles
  • Worldwide AC input 100-240V at 50/60Hz for travel
  • Delivers stable +12V and +4.8V DC rails to the system
  • Four-pin connector matches the original motherboard header exactly
  • Unit is fully tested before dispatch for reliable operation

Replacement PSU for PS4 CUH-12XX

This 4-pin power supply replaces the original ADP-200ER unit in Sony PlayStation 4 consoles carrying the CUH-1215A or CUH-12XX model codes. It is built as a direct swap for a failed or noisy internal brick. The part is not suitable for earlier or later PS4 revisions that use a different pin layout or form factor.

AT-type unit with 100-240 V input

The supply accepts AC mains from 100 to 240 volts at 2.5 amps across 50 or 60 Hz, so it works on household power worldwide without a voltage switch. A fixed 4-pin connector plugs straight into the console’s mainboard, eliminating cable adapters. Build quality targets the same fit and finish as the factory component.

Single 12 V rail at 4.8 A

The only output rail delivers 12 volts at 4.8 amps, which is the exact current the CUH-12XX motherboard expects. If your console needs a different voltage combination or a higher 12 V current rating, this unit will not meet the requirement. Verify the model stamp on your original supply before ordering.

特長

  • Direct replacement for PS4 CUH-1215A and CUH-12XX consoles
  • Worldwide AC input 100-240V at 50/60Hz for travel
  • Delivers stable +12V and +4.8V DC rails to the system
  • Four-pin connector matches the original motherboard header exactly
  • Unit is fully tested before dispatch for reliable operation

仕様

TypeAT

この商品に関する質問

What AC input range and frequency does the ADP-200ER accept?

The unit accepts 100 to 240 volts at 50 or 60 Hz with a 2.5 amp draw.

Which PlayStation 4 models does the 4-pin ADP-200ER fit?

It fits the CUH-1215A and CUH-12XX series consoles that use a 4-pin power cable.

How do I install the ADP-200ER and what step is often missed?

Open the console, disconnect the old 4-pin connector, fit the new unit, and ensure the 4-pin plug seats fully before reassembly.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。