BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 $
0.00276771BTC
Διαθέσιμο
myVolts
myVolts ATX-250W 250W 20+4 Pin Red Mute Fan Manual 115/230V power supply
A 250 W ATX power supply with a 20+4 pin motherboard connector, 4 pin CPU power, two SATA and one 6 pin graphics connector, manual 115/230 V switching and a thermally controlled 12 cm red mute fan
- TypeAT
- Delivers 250 W rated output for stable desktop operation
- 12 cm red mute fan with thermal speed control runs quietly
- Manual 115/230 V switch supports global mains voltages
- 20+4 pin, 4 pin CPU, 2 SATA and 6 pin graphics connectors cover essential builds
- Compact 140 x 150 x 86 mm chassis fits small cases easily
Basic desktop power supply
This 250W ATX unit delivers 20+4 pin motherboard power plus 4 pin CPU 12V two SATA and one 6 pin graphics connector. Manual 115/230V input switching and a thermally controlled 12cm red mute fan keep noise low for everyday office builds. Efficiency exceeds 80 percent and hold time is greater than 10ms. The compact 140 x 150 x 86mm form factor fits standard cases and includes a 1.1 metre power cord.
Ideal for low draw office PCs
Suits basic desktop systems with modest power needs and a single graphics card requiring only a 6 pin connector. Builders needing more than two SATA drives additional PCIe power cables or active PFC should consider a higher capacity unit. The manual voltage switch requires correct setting before use so it is not ideal for regions without stable mains selection.
250 watt rated output
The single figure that decides compatibility is the 250W continuous rating. Verify that the combined load of CPU GPU drives and peripherals stays below this limit. If your configuration demands more headroom this supply will not be sufficient.
Βασικά χαρακτηριστικά
- Delivers 250 W rated output for stable desktop operation
- 12 cm red mute fan with thermal speed control runs quietly
- Manual 115/230 V switch supports global mains voltages
- 20+4 pin, 4 pin CPU, 2 SATA and 6 pin graphics connectors cover essential builds
- Compact 140 x 150 x 86 mm chassis fits small cases easily
Προδιαγραφές
| Type | AT |
|---|
Ερωτήσεις για αυτό το προϊόν
How loud does the 12 cm mute fan get when the ATX-250W runs all day?
The 12 cm fan speed is automatically controlled by an internal thermal sensor, so noise stays low during continuous operation.
Which connectors must my motherboard and drives already provide for this 250 W unit to work?
You need a 20+4 pin motherboard socket, a 4 pin CPU 12 V socket, two SATA power sockets and a 6 pin graphics socket.
Will the manual 115/230 V switch and lack of active PFC cause issues with older components I keep?
The manual voltage switch lets you match local mains, and the >80 % efficiency with >10 ms hold time supports legacy hardware reliably.
Επίσης σε αυτό το ράφι
Οι πελάτες σύγκριναν και αυτά
Ίδιο ράφι, ίδιο ταμείο — οκτώ νομίσματα και κλείδωμα ισοτιμίας 30 λεπτών.
