Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
myVolts ATX-250W power supply unit, matte black box with red 12cm fan, 20+4 pin connector visible, manual 115/230V switch

myVolts

myVolts ATX-250W 250W 20+4 Pin Red Mute Fan Manual 115/230V power supply

SKU CH-TH3V-GTG2E MPN ATX-250W

A 250 W ATX power supply with a 20+4 pin motherboard connector, 4 pin CPU power, two SATA and one 6 pin graphics connector, manual 115/230 V switching and a thermally controlled 12 cm red mute fan

  • TypeAT
  • Delivers 250 W rated output for stable desktop operation
  • 12 cm red mute fan with thermal speed control runs quietly
  • Manual 115/230 V switch supports global mains voltages
  • 20+4 pin, 4 pin CPU, 2 SATA and 6 pin graphics connectors cover essential builds
  • Compact 140 x 150 x 86 mm chassis fits small cases easily

Basic desktop power supply

This 250W ATX unit delivers 20+4 pin motherboard power plus 4 pin CPU 12V two SATA and one 6 pin graphics connector. Manual 115/230V input switching and a thermally controlled 12cm red mute fan keep noise low for everyday office builds. Efficiency exceeds 80 percent and hold time is greater than 10ms. The compact 140 x 150 x 86mm form factor fits standard cases and includes a 1.1 metre power cord.

Ideal for low draw office PCs

Suits basic desktop systems with modest power needs and a single graphics card requiring only a 6 pin connector. Builders needing more than two SATA drives additional PCIe power cables or active PFC should consider a higher capacity unit. The manual voltage switch requires correct setting before use so it is not ideal for regions without stable mains selection.

250 watt rated output

The single figure that decides compatibility is the 250W continuous rating. Verify that the combined load of CPU GPU drives and peripherals stays below this limit. If your configuration demands more headroom this supply will not be sufficient.

Pluspunten

  • Delivers 250 W rated output for stable desktop operation
  • 12 cm red mute fan with thermal speed control runs quietly
  • Manual 115/230 V switch supports global mains voltages
  • 20+4 pin, 4 pin CPU, 2 SATA and 6 pin graphics connectors cover essential builds
  • Compact 140 x 150 x 86 mm chassis fits small cases easily

Specificaties

TypeAT

Vragen over dit artikel

How loud does the 12 cm mute fan get when the ATX-250W runs all day?

The 12 cm fan speed is automatically controlled by an internal thermal sensor, so noise stays low during continuous operation.

Which connectors must my motherboard and drives already provide for this 250 W unit to work?

You need a 20+4 pin motherboard socket, a 4 pin CPU 12 V socket, two SATA power sockets and a 6 pin graphics socket.

Will the manual 115/230 V switch and lack of active PFC cause issues with older components I keep?

The manual voltage switch lets you match local mains, and the >80 % efficiency with >10 ms hold time supports legacy hardware reliably.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.