BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 $
0.00279596BTC
Διαθέσιμο
NEMIX RAM
NEMIX RAM 16GB (2x8GB) DDR4 3200 CL22 1.2V 260-pin SODIMM kit for POSIFLEX RT-6016-G2
A 16 GB DDR4 SODIMM kit running at 3200 MHz with CL22 latency and 1.2 V operation, built for the POSIFLEX RT-6016-G2 terminal
- Capacity16GB (2 x 8GB)
- SpeedDDR4 3200 (PC4 25600)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.20V
- 16GB kit (2×8GB) doubles terminal memory capacity
- DDR4 3200 speed handles POS workloads smoothly
- CL22 latency at 1.20V keeps power draw low
- 260-pin SODIMM fits POSIFLEX RT-6016-G2 slot directly
- Major OEM chips (Samsung, Micron, Hynix) ensure stable operation
POS terminal memory kit
This 16 GB DDR4 SODIMM kit is built specifically for the POSIFLEX RT-6016-G2 slim terminal. It delivers a matched pair of 8 GB modules so the system can run in dual-channel mode for smoother point-of-sale workloads.
DDR4 3200 CL22 limits
The modules operate at 3200 MT/s with a CAS latency of 22 and a standard 1.2 V supply. As non-ECC unbuffered memory they provide no error correction, so data integrity relies on the terminal's own controller rather than the DIMMs themselves.
No-spreader 260-pin build
Each stick uses a plain green PCB without a heat spreader, keeping the low profile required by slim terminal chassis. The 260-pin edge connector slots directly into the SODIMM sockets, and the 2Rx8 organisation is handled transparently by the platform firmware.
Βασικά χαρακτηριστικά
- 16GB kit (2×8GB) doubles terminal memory capacity
- DDR4 3200 speed handles POS workloads smoothly
- CL22 latency at 1.20V keeps power draw low
- 260-pin SODIMM fits POSIFLEX RT-6016-G2 slot directly
- Major OEM chips (Samsung, Micron, Hynix) ensure stable operation
Προδιαγραφές
| Brand | NEMIX RAM |
|---|---|
| Series | POSIFLEX POS Series Point of Sale Kiosk Memory |
| Model | POSIFLEX POS DDR4 3200MHZ Non-ECC Unbuffered SODIMM |
| Part Number | MS25600-828K2 |
| Capacity | 16GB (2 x 8GB) |
| Speed | DDR4 3200 (PC4 25600) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.20V |
| Compatible System | POSIFLEX POS |
| CAS Latency | CL22 |
| Heat Spreader | No |
| Type | 260-Pin DDR4 SODIMM |
| Rank | 2Rx8 |
| Features | DDR4 Non-ECC Unbuffered SODIMM Motherboard Compatible |
| Package Content | 16GB (2X8GB) DDR4 3200MHZ PC4-25600 2Rx8 1.2V CL22 260-PIN Non-ECC Unbuffered SODIMM POS Memory KIT |
Ερωτήσεις για αυτό το προϊόν
Should I pick the 2x8 GB kit or a single 16 GB module for my RT-6016-G2?
The kit supplies two matched 8 GB SODIMMs so the terminal can run in dual-channel mode, which gives higher bandwidth than a single 16 GB stick.
What does the 3200 MHz rating actually deliver inside the POSIFLEX terminal?
The modules run at DDR4 3200 with CL22 latency at 1.20 V, so the system sees PC4-25600 transfer rates once the BIOS applies the JEDEC profile.
Does the 260-pin SODIMM interface limit the speed on this platform?
The 260-pin DDR4 SODIMM form factor carries the full 3200 MT/s signal; the terminal's memory controller determines the final operating speed.
Επίσης σε αυτό το ράφι
Οι πελάτες σύγκριναν και αυτά
Ίδιο ράφι, ίδιο ταμείο — οκτώ νομίσματα και κλείδωμα ισοτιμίας 30 λεπτών.
