We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two green DDR4 SODIMM sticks with black chips, no heat spreader

NEMIX RAM

NEMIX RAM 16GB (2x8GB) DDR4 3200 CL22 1.2V 260-pin SODIMM kit for POSIFLEX RT-6016-G2

SKU CH-9AXS-CNVXA

A 16 GB DDR4 SODIMM kit running at 3200 MHz with CL22 latency and 1.2 V operation, built for the POSIFLEX RT-6016-G2 terminal

  • Capacity16GB (2 x 8GB)
  • SpeedDDR4 3200 (PC4 25600)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 16GB kit (2×8GB) doubles terminal memory capacity
  • DDR4 3200 speed handles POS workloads smoothly
  • CL22 latency at 1.20V keeps power draw low
  • 260-pin SODIMM fits POSIFLEX RT-6016-G2 slot directly
  • Major OEM chips (Samsung, Micron, Hynix) ensure stable operation

POS terminal memory kit

This 16 GB DDR4 SODIMM kit is built specifically for the POSIFLEX RT-6016-G2 slim terminal. It delivers a matched pair of 8 GB modules so the system can run in dual-channel mode for smoother point-of-sale workloads.

DDR4 3200 CL22 limits

The modules operate at 3200 MT/s with a CAS latency of 22 and a standard 1.2 V supply. As non-ECC unbuffered memory they provide no error correction, so data integrity relies on the terminal's own controller rather than the DIMMs themselves.

No-spreader 260-pin build

Each stick uses a plain green PCB without a heat spreader, keeping the low profile required by slim terminal chassis. The 260-pin edge connector slots directly into the SODIMM sockets, and the 2Rx8 organisation is handled transparently by the platform firmware.

Highlights

  • 16GB kit (2×8GB) doubles terminal memory capacity
  • DDR4 3200 speed handles POS workloads smoothly
  • CL22 latency at 1.20V keeps power draw low
  • 260-pin SODIMM fits POSIFLEX RT-6016-G2 slot directly
  • Major OEM chips (Samsung, Micron, Hynix) ensure stable operation

Specifications

BrandNEMIX RAM
SeriesPOSIFLEX POS Series Point of Sale Kiosk Memory
ModelPOSIFLEX POS DDR4 3200MHZ Non-ECC Unbuffered SODIMM
Part NumberMS25600-828K2
Capacity16GB (2 x 8GB)
SpeedDDR4 3200 (PC4 25600)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemPOSIFLEX POS
CAS LatencyCL22
Heat SpreaderNo
Type260-Pin DDR4 SODIMM
Rank2Rx8
FeaturesDDR4 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content16GB (2X8GB) DDR4 3200MHZ PC4-25600 2Rx8 1.2V CL22 260-PIN Non-ECC Unbuffered SODIMM POS Memory KIT

Questions about this item

Should I pick the 2x8 GB kit or a single 16 GB module for my RT-6016-G2?

The kit supplies two matched 8 GB SODIMMs so the terminal can run in dual-channel mode, which gives higher bandwidth than a single 16 GB stick.

What does the 3200 MHz rating actually deliver inside the POSIFLEX terminal?

The modules run at DDR4 3200 with CL22 latency at 1.20 V, so the system sees PC4-25600 transfer rates once the BIOS applies the JEDEC profile.

Does the 260-pin SODIMM interface limit the speed on this platform?

The 260-pin DDR4 SODIMM form factor carries the full 3200 MT/s signal; the terminal's memory controller determines the final operating speed.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.