BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 $
0.0027736BTC
Διαθέσιμο
NEMIX RAM
NEMIX RAM 16GB DDR4 3200 CL22 260-Pin SODIMM POSIFLEX JK-3232 memory upgrade
16 GB DDR4 3200 CL22 SODIMM for Posiflex JK-3232 kiosks, 1.2 V unbuffered non-ECC
- Capacity16GB
- SpeedDDR4 3200 (PC4 25600)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.20V
- 16 GB capacity boosts kiosk multitasking headroom
- DDR4 3200 speed matches POSIFLEX JK-3232 spec
- CL22 latency keeps data flow steady
- 2 V operation cuts power draw and heat
- 260-pin SODIMM fits the Cachet Series slot exactly
POSIFLEX JK-3232 Memory Upgrade
This NEMIX RAM module delivers 16GB of DDR4 3200 memory in a 260-pin SODIMM form factor. It is built specifically for the POSIFLEX JK-3232 Cachet Series kiosk and operates at 1.2V with CL22 latency. The unbuffered, non-ECC design uses major OEM chips from Samsung, Micron or Hynix.
Kiosk Operators Needing Single-Slot Capacity
The single 16GB stick suits technicians upgrading a POSIFLEX JK-3232 where one slot is free or a full replacement is planned. It is not ECC registered, so it will not meet requirements for servers or workstations that demand error-correcting memory. Buyers needing registered DIMMs or a different pin count should look elsewhere.
Drop-In DDR4 SODIMM for POSIFLEX JK-3232
Installation follows the kiosk service manual and uses the existing SODIMM slot without extra cables or brackets. The 1.2V operation matches the platform's standard DDR4 voltage, leaving the original power budget unchanged. The module frees the second slot when only one is populated, allowing a future 16GB addition.
Βασικά χαρακτηριστικά
- 16 GB capacity boosts kiosk multitasking headroom
- DDR4 3200 speed matches POSIFLEX JK-3232 spec
- CL22 latency keeps data flow steady
- 2 V operation cuts power draw and heat
- 260-pin SODIMM fits the Cachet Series slot exactly
Προδιαγραφές
| Brand | NEMIX RAM |
|---|---|
| Series | POSIFLEX POS Series Point of Sale Kiosk Memory |
| Model | POSIFLEX POS DDR4 3200MHZ Non-ECC Unbuffered SODIMM |
| Part Number | MS25600-628K1 |
| Capacity | 16GB |
| Speed | DDR4 3200 (PC4 25600) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.20V |
| Compatible System | POSIFLEX POS |
| CAS Latency | CL22 |
| Heat Spreader | No |
| Type | 260-Pin DDR4 SODIMM |
| Rank | 2Rx8 |
| Features | DDR4 Non-ECC Unbuffered SODIMM Motherboard Compatible |
| Package Content | 16GB (1X16GB) DDR4 3200MHZ PC4-25600 2Rx8 1.2V CL22 260-PIN Non-ECC Unbuffered SODIMM |
Ερωτήσεις για αυτό το προϊόν
Does my POSIFLEX JK-3232 kiosk need any specific BIOS setting or firmware revision before I install this DDR4 3200 CL22 SODIMM?
The module is built to JEDEC DDR4 3200 PC4-25600 1.20V CL22 2Rx8 260-pin SODIMM specification; the kiosk must accept standard non-ECC unbuffered DDR4 SODIMMs at that voltage and speed.
Can I keep an older DDR4 SODIMM in the second slot while adding this 16GB stick?
Both modules must be non-ECC unbuffered DDR4 SODIMMs; the system will run at the lowest common speed and latency, so match voltage (1.20V) and pin count (260) for stability.
How can I verify the stick is recognised at 3200 MT/s with CL22 timing after installation?
Open Task Manager > Performance > Memory or run CPU-Z; confirm speed reads 3200 MT/s, CAS latency shows 22, and capacity reports 16GB (1X16GB).
Επίσης σε αυτό το ράφι
Οι πελάτες σύγκριναν και αυτά
Ίδιο ράφι, ίδιο ταμείο — οκτώ νομίσματα και κλείδωμα ισοτιμίας 30 λεπτών.
