BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 $
0.00277188BTC
Διαθέσιμο
NEMIX RAM
NEMIX RAM 16GB DDR4 3200 CL22 2Rx8 260-Pin SODIMM for POSIFLEX TK-3232 Paragon Series Kiosk memory upgrade
16 GB DDR4 3200 CL22 SODIMM for POSIFLEX TK-3232 Paragon Series kiosk upgrade
- Capacity16GB
- SpeedDDR4 3200 (PC4 25600)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.20V
- 16 GB DDR4 3200 boosts kiosk throughput
- CL22 1.20 V runs cool in compact chassis
- 2Rx8 260-pin SODIMM fits POSIFLEX TK-3232 slot
- Major OEM Samsung Micron Hynix chips ensure stability
- Non-ECC unbuffered design keeps upgrade simple
NEMIX RAM 16GB DDR4 3200 SODIMM
This module delivers 16GB of DDR4 memory at 3200MHz with CL22 latency for the POSIFLEX TK-3232 Paragon Series kiosk. It is built for point-of-sale systems that require reliable, non-ECC unbuffered memory in a 260-pin SODIMM form factor. The single 16GB stick uses 2Rx8 organisation and operates at 1.2V. Buyers needing ECC error correction or registered buffering should look elsewhere.
Sustained load behaviour
The memory runs at PC4-25600 speed with major OEM chips from Samsung, Micron or Hynix. Each unit is stress tested under load before shipping to verify stability during continuous kiosk operation. Unbuffered design keeps latency low for transaction processing workloads. Systems requiring higher capacities per slot or multi-channel kits beyond a single module are not addressed by this part.
Thermals noise and power
Operating at 1.20V without a heat spreader, the module draws minimal power and produces no audible noise. Passive cooling relies on chassis airflow typical of compact kiosk enclosures. The low voltage helps limit thermal output during extended retail hours. Builds that demand active cooling solutions or voltage headroom for overclocking fall outside the intended use case.
Βασικά χαρακτηριστικά
- 16 GB DDR4 3200 boosts kiosk throughput
- CL22 1.20 V runs cool in compact chassis
- 2Rx8 260-pin SODIMM fits POSIFLEX TK-3232 slot
- Major OEM Samsung Micron Hynix chips ensure stability
- Non-ECC unbuffered design keeps upgrade simple
Προδιαγραφές
| Brand | NEMIX RAM |
|---|---|
| Series | POSIFLEX POS Series Point of Sale Kiosk Memory |
| Model | POSIFLEX POS DDR4 3200MHZ Non-ECC Unbuffered SODIMM |
| Part Number | MS25600-628K1 |
| Capacity | 16GB |
| Speed | DDR4 3200 (PC4 25600) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.20V |
| Compatible System | POSIFLEX POS |
| CAS Latency | CL22 |
| Heat Spreader | No |
| Type | 260-Pin DDR4 SODIMM |
| Rank | 2Rx8 |
| Features | DDR4 Non-ECC Unbuffered SODIMM Motherboard Compatible |
| Package Content | 16GB (1X16GB) DDR4 3200MHZ PC4-25600 2Rx8 1.2V CL22 260-PIN Non-ECC Unbuffered SODIMM |
Ερωτήσεις για αυτό το προϊόν
How much heat does the 1.20V DDR4 module add when the kiosk runs continuously?
At 1.20 volts the SODIMM draws minimal power, so it adds very little heat inside the compact POSIFLEX TK-3232 chassis.
What must the POSIFLEX TK-3232 already have for this 260-pin SODIMM to work?
The kiosk needs a free DDR4 SODIMM slot that accepts 2Rx8 non-ECC unbuffered modules at 3200 MT/s.
Will this CL22 3200 module run stably alongside the original memory in my Paragon Series unit?
Yes, it matches the factory DDR4 3200 spec and 2Rx8 organisation, so the system will clock both sticks to the same timings.
Επίσης σε αυτό το ράφι
Οι πελάτες σύγκριναν και αυτά
Ίδιο ράφι, ίδιο ταμείο — οκτώ νομίσματα και κλείδωμα ισοτιμίας 30 λεπτών.
