Nous acceptons la cryptomonnaie — les cryptos que vous détenez peuvent ainsi acheter du matériel réel.Payez en crypto, dépensez-la en matériel réel. Livraison assurée offerte partout dans le monde au-delà de 399 $. Cartons neutres, sans marque, expédiés depuis l’Allemagne.Livraison assurée offerte au-delà de 399 $. Votre taux est bloqué pendant 30 minutes dès l’ouverture de la caisse.Taux bloqué 30 minutes. Chaque article est scellé, son numéro de série est vérifié, et il est couvert par une garantie de 24 mois.Scellé, garanti 24 mois.

Articles suivis Se connecter

NEMIX RAM

NEMIX RAM 16GB DDR4 3200 CL22 2Rx8 260-Pin SODIMM for POSIFLEX TK-3232 Paragon Series Kiosk memory upgrade

SKU CH-HMCR-X3YSA

16 GB DDR4 3200 CL22 SODIMM for POSIFLEX TK-3232 Paragon Series kiosk upgrade

  • Capacity16GB
  • SpeedDDR4 3200 (PC4 25600)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 16 GB DDR4 3200 boosts kiosk throughput
  • CL22 1.20 V runs cool in compact chassis
  • 2Rx8 260-pin SODIMM fits POSIFLEX TK-3232 slot
  • Major OEM Samsung Micron Hynix chips ensure stability
  • Non-ECC unbuffered design keeps upgrade simple

NEMIX RAM 16GB DDR4 3200 SODIMM

This module delivers 16GB of DDR4 memory at 3200MHz with CL22 latency for the POSIFLEX TK-3232 Paragon Series kiosk. It is built for point-of-sale systems that require reliable, non-ECC unbuffered memory in a 260-pin SODIMM form factor. The single 16GB stick uses 2Rx8 organisation and operates at 1.2V. Buyers needing ECC error correction or registered buffering should look elsewhere.

Sustained load behaviour

The memory runs at PC4-25600 speed with major OEM chips from Samsung, Micron or Hynix. Each unit is stress tested under load before shipping to verify stability during continuous kiosk operation. Unbuffered design keeps latency low for transaction processing workloads. Systems requiring higher capacities per slot or multi-channel kits beyond a single module are not addressed by this part.

Thermals noise and power

Operating at 1.20V without a heat spreader, the module draws minimal power and produces no audible noise. Passive cooling relies on chassis airflow typical of compact kiosk enclosures. The low voltage helps limit thermal output during extended retail hours. Builds that demand active cooling solutions or voltage headroom for overclocking fall outside the intended use case.

Points forts

  • 16 GB DDR4 3200 boosts kiosk throughput
  • CL22 1.20 V runs cool in compact chassis
  • 2Rx8 260-pin SODIMM fits POSIFLEX TK-3232 slot
  • Major OEM Samsung Micron Hynix chips ensure stability
  • Non-ECC unbuffered design keeps upgrade simple

Caractéristiques

BrandNEMIX RAM
SeriesPOSIFLEX POS Series Point of Sale Kiosk Memory
ModelPOSIFLEX POS DDR4 3200MHZ Non-ECC Unbuffered SODIMM
Part NumberMS25600-628K1
Capacity16GB
SpeedDDR4 3200 (PC4 25600)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemPOSIFLEX POS
CAS LatencyCL22
Heat SpreaderNo
Type260-Pin DDR4 SODIMM
Rank2Rx8
FeaturesDDR4 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content16GB (1X16GB) DDR4 3200MHZ PC4-25600 2Rx8 1.2V CL22 260-PIN Non-ECC Unbuffered SODIMM

Questions sur cet article

How much heat does the 1.20V DDR4 module add when the kiosk runs continuously?

At 1.20 volts the SODIMM draws minimal power, so it adds very little heat inside the compact POSIFLEX TK-3232 chassis.

What must the POSIFLEX TK-3232 already have for this 260-pin SODIMM to work?

The kiosk needs a free DDR4 SODIMM slot that accepts 2Rx8 non-ECC unbuffered modules at 3200 MT/s.

Will this CL22 3200 module run stably alongside the original memory in my Paragon Series unit?

Yes, it matches the factory DDR4 3200 spec and 2Rx8 organisation, so the system will clock both sticks to the same timings.

Également dans ce rayon

Les clients ont aussi comparé

Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.