Green printed circuit board DDR4 RDIMM module with black memory chips no heat spreader 288 gold pins

NEMIX RAM

NEMIX RAM 16GB DDR4 3200 PC4-25600 ECC RDIMM Supermicro H12SST-PS memory upgrade

SKU CH-5J6Z-BT54B

16 GB DDR4 3200 ECC registered RDIMM for Supermicro H12SST-PS EPYC servers

Capacity16GB
SpeedDDR4 3200 (PC4 25600)
ECCYes
Buffered/RegisteredRegistered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V

16 GB DDR4 3200 boosts server throughput
ECC registered design protects data integrity
CL22 latency at 1.2 V keeps power low
288-pin 1Rx4 module fits Supermicro H12SST-PS
Major OEM chips tested under load for stability

118,99 $

0.00151072 BTC με τη σημερινή ισοτιμία

Διαθέσιμο · αποστολή σήμερα

Το ταμείο κλειδώνει την ισοτιμία σας για 30 λεπτά.

Παράδοση προς Ηνωμένες Πολιτείες εκτίμηση

UPS Worldwide Expedited 3–6 εργάσιμες ημέρες 39,90 $
DHL Express Worldwide 2–3 εργάσιμες ημέρες 74,90 $

Προσθέστε 280,01 $ ακόμη και η βασική αποστολή γίνεται δωρεάν.

Οι εισαγωγικοί δασμοί επιβάλλονται κατά την άφιξη από τη χώρα σας.

Αποστολή αλλού

Targeted server memory upgrade

This 16GB DDR4 3200 module is built for the Supermicro H12SST-PS motherboard running AMD EPYC processors. It delivers ECC registered operation at 1.2V with a CL22 latency profile for stable data integrity in critical workloads.

Suited for single-slot capacity expansion

Ideal for administrators adding memory to a validated Supermicro H12SST-PS platform where registered ECC RDIMMs are required. Not suited for consumer desktop boards that accept only unbuffered non-ECC DIMMs or systems limited to lower DDR4 speeds.

Straightforward DIMM installation

The 288-pin RDIMM seats in a standard DDR4 slot without tools or cables. Ensure the motherboard firmware is current and populate slots per the Supermicro H12SST-PS population guide; mismatched rank configurations or missing BIOS updates are the typical causes of POST failure.

Βασικά χαρακτηριστικά

16 GB DDR4 3200 boosts server throughput
ECC registered design protects data integrity
CL22 latency at 1.2 V keeps power low
288-pin 1Rx4 module fits Supermicro H12SST-PS
Major OEM chips tested under load for stability

Προδιαγραφές

Brand	NEMIX RAM
Series	SuperMicro Server/Workstation Compatible Series Memory
Model	SuperMicro DDR4 3200MHZ ECC RDIMM Registered Server Memory
Part Number	MR25600-614K1
Capacity	16GB
Speed	DDR4 3200 (PC4 25600)
ECC	Yes
Buffered/Registered	Registered
Chipset	Major OEM Samsung, Micron, Hynix
Voltage	1.20V
Compatible System	Supermicro
CAS Latency	CL22
Heat Spreader	No
Type	288-Pin DDR4 RDIMM
Rank	1Rx4
Features	DDR4 ECC Registered RDIMM Server Motherboard Compatible
Package Content	16GB (1X16GB) DDR4 3200MHZ PC4-25600 1Rx4 1.2V CL22 288-PIN ECC RDIMM Registered Server Memory

Ερωτήσεις για αυτό το προϊόν

My Supermicro H12SST-PS board has empty DDR4 RDIMM slots — is this 288-pin module the correct form factor?

Yes — the module is a 288-pin DDR4 RDIMM, which matches the registered DIMM slots on your H12SST-PS motherboard.

Can I add this 1Rx4 registered ECC stick to existing DDR4 3200 RDIMMs that are also 1.2 V and CL22?

Provided the installed modules are also DDR4 3200 registered ECC at 1.2 V with CL22 timing, the new 1Rx4 stick will operate alongside them at the same speed and voltage.

After seating the module, how can I confirm the system recognises the full 16 GB at 3200 MT/s with ECC active?

Check the BIOS memory information or run a hardware utility — it should show 16 GB, DDR4-3200, registered ECC, 1Rx4 organisation and CL22 latency.

Επίσης σε αυτό το ράφι