SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
391,99 $
0.00500325BTC
Krājumā
NEMIX RAM
NEMIX RAM 16GB DDR4 3200 PC4-25600 ECC RDIMM Supermicro H12SST-PS memory upgrade
16 GB DDR4 3200 ECC registered RDIMM for Supermicro H12SST-PS EPYC servers
- Capacity16GB
- SpeedDDR4 3200 (PC4 25600)
- ECCYes
- Buffered/RegisteredRegistered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.20V
- 16 GB DDR4 3200 boosts server throughput
- ECC registered design protects data integrity
- CL22 latency at 1.2 V keeps power low
- 288-pin 1Rx4 module fits Supermicro H12SST-PS
- Major OEM chips tested under load for stability
Targeted server memory upgrade
This 16GB DDR4 3200 module is built for the Supermicro H12SST-PS motherboard running AMD EPYC processors. It delivers ECC registered operation at 1.2V with a CL22 latency profile for stable data integrity in critical workloads.
Suited for single-slot capacity expansion
Ideal for administrators adding memory to a validated Supermicro H12SST-PS platform where registered ECC RDIMMs are required. Not suited for consumer desktop boards that accept only unbuffered non-ECC DIMMs or systems limited to lower DDR4 speeds.
Straightforward DIMM installation
The 288-pin RDIMM seats in a standard DDR4 slot without tools or cables. Ensure the motherboard firmware is current and populate slots per the Supermicro H12SST-PS population guide; mismatched rank configurations or missing BIOS updates are the typical causes of POST failure.
Priekšrocības
- 16 GB DDR4 3200 boosts server throughput
- ECC registered design protects data integrity
- CL22 latency at 1.2 V keeps power low
- 288-pin 1Rx4 module fits Supermicro H12SST-PS
- Major OEM chips tested under load for stability
Specifikācijas
| Brand | NEMIX RAM |
|---|---|
| Series | SuperMicro Server/Workstation Compatible Series Memory |
| Model | SuperMicro DDR4 3200MHZ ECC RDIMM Registered Server Memory |
| Part Number | MR25600-614K1 |
| Capacity | 16GB |
| Speed | DDR4 3200 (PC4 25600) |
| ECC | Yes |
| Buffered/Registered | Registered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.20V |
| Compatible System | Supermicro |
| CAS Latency | CL22 |
| Heat Spreader | No |
| Type | 288-Pin DDR4 RDIMM |
| Rank | 1Rx4 |
| Features | DDR4 ECC Registered RDIMM Server Motherboard Compatible |
| Package Content | 16GB (1X16GB) DDR4 3200MHZ PC4-25600 1Rx4 1.2V CL22 288-PIN ECC RDIMM Registered Server Memory |
Jautājumi par šo preci
My Supermicro H12SST-PS board has empty DDR4 RDIMM slots — is this 288-pin module the correct form factor?
Yes — the module is a 288-pin DDR4 RDIMM, which matches the registered DIMM slots on your H12SST-PS motherboard.
Can I add this 1Rx4 registered ECC stick to existing DDR4 3200 RDIMMs that are also 1.2 V and CL22?
Provided the installed modules are also DDR4 3200 registered ECC at 1.2 V with CL22 timing, the new 1Rx4 stick will operate alongside them at the same speed and voltage.
After seating the module, how can I confirm the system recognises the full 16 GB at 3200 MT/s with ECC active?
Check the BIOS memory information or run a hardware utility — it should show 16 GB, DDR4-3200, registered ECC, 1Rx4 organisation and CL22 latency.
Arī šajā sadaļā
Klienti arī salīdzināja
Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.
