BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 $
0.00277131BTC
Διαθέσιμο
NEMIX RAM
NEMIX RAM 1TB (8x128GB) DDR5 6400MHz CL52 ECC RDIMM Supermicro X14SBI-F memory upgrade
Eight 128 GB DDR5 registered ECC modules running at 6400 MHz CL52 and 1.1 V for Supermicro X14SBI-F servers
- Capacity1TB (8 x 128GB)
- ECCYes
- Buffered/RegisteredRegistered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.10V
- Compatible SystemSupermicro
- 1TB capacity across 8 modules expands server memory for large datasets
- DDR5 6400MHz CL52 delivers high throughput with low latency
- ECC registered design detects and corrects errors for data integrity
- 10V operation reduces power draw under heavy workloads
- Validated for Supermicro X14SBI-F ensures plug-in compatibility
1TB DDR5 ECC RDIMM Kit
This NEMIX RAM kit delivers 1TB of DDR5 ECC registered memory across eight 128GB modules for the Supermicro X14SBI-F platform. It targets server and workstation operators who need maximum registered capacity with error correction for mission-critical workloads. The modules run at 6400MHz with CL52 latency at 1.1V.
Upgrade From Lower Capacity RDIMMs
The jump is worth it when your current registered DIMM population leaves free slots but the workload demands more addressable memory for virtualization, databases or AI datasets. Replacing smaller RDIMMs with this 8x128GB kit fills every channel with quad-rank density without changing voltage or form factor.
Installation And Common Issues
Installation follows standard 288-pin DDR5 RDIMM seating in the Supermicro X14SBI-F slots; refer to the board manual for population order. The most frequent issues are mixing ranks across channels, skipping required BIOS updates for 128GB modules, or populating slots in an unsupported sequence that prevents training.
Βασικά χαρακτηριστικά
- 1TB capacity across 8 modules expands server memory for large datasets
- DDR5 6400MHz CL52 delivers high throughput with low latency
- ECC registered design detects and corrects errors for data integrity
- 10V operation reduces power draw under heavy workloads
- Validated for Supermicro X14SBI-F ensures plug-in compatibility
Προδιαγραφές
| Brand | NEMIX RAM |
|---|---|
| Series | Supermicro Compatible Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server RAM |
| Part Number | MR51200-744K8 |
| Capacity | 1TB (8 x 128GB) |
| ECC | Yes |
| Buffered/Registered | Registered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.10V |
| Compatible System | Supermicro |
| CAS Latency | CL52 |
| Heat Spreader | No |
| Type | 288-PIN DDR5 RDIMM |
| Rank | 4Rx4 |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 1TB (8 x 128GB) DDR5 6400MHz PC5-51200 4Rx4 1.1V 288-PIN ECC RDIMM KIT |
Ερωτήσεις για αυτό το προϊόν
Will the 288-pin DDR5 RDIMM modules fit the Supermicro X14SBI-F memory slots?
Yes, the 288-pin DDR5 RDIMM form factor matches the memory slots on the Supermicro X14SBI-F motherboard.
What is the correct sequence for populating the eight 128GB modules during installation?
Follow the Supermicro X14SBI-F manual to populate channels in the prescribed order; the common error is filling slots sequentially instead of balancing across channels.
When should the registered ECC modules be replaced if correctable error counts rise?
Replace modules when the system logs show increasing correctable ECC errors, indicating chip degradation before uncorrectable failures occur.
Επίσης σε αυτό το ράφι
Οι πελάτες σύγκριναν και αυτά
Ίδιο ράφι, ίδιο ταμείο — οκτώ νομίσματα και κλείδωμα ισοτιμίας 30 λεπτών.
