Vi tar emot kryptovaluta — så att kryptot du äger kan köpa riktig hårdvara.Betala med krypto, använd det till riktig hårdvara. Fri, försäkrad frakt över hela världen vid köp över 399 $. Neutrala, omärkta ytterkartonger, skickade från Tyskland.Fri, försäkrad frakt över 399 $. Din kurs låses i 30 minuter så snart kassan öppnas.Kursen låst i 30 minuter. Varje artikel är förseglad, har kontrollerat serienummer och täcks av 24 månaders garanti.Förseglad, 24 månaders garanti.

Bevakade produkter Logga in
Eight green DDR5 RDIMM modules in anti-static packaging

NEMIX RAM

NEMIX RAM 1TB (8x128GB) DDR5 6400MHz CL52 ECC RDIMM Supermicro X14SBI-F memory upgrade

SKU CH-11RF-SEYER

Eight 128 GB DDR5 registered ECC modules running at 6400 MHz CL52 and 1.1 V for Supermicro X14SBI-F servers

  • Capacity1TB (8 x 128GB)
  • ECCYes
  • Buffered/RegisteredRegistered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.10V
  • Compatible SystemSupermicro
  • 1TB capacity across 8 modules expands server memory for large datasets
  • DDR5 6400MHz CL52 delivers high throughput with low latency
  • ECC registered design detects and corrects errors for data integrity
  • 10V operation reduces power draw under heavy workloads
  • Validated for Supermicro X14SBI-F ensures plug-in compatibility

1TB DDR5 ECC RDIMM Kit

This NEMIX RAM kit delivers 1TB of DDR5 ECC registered memory across eight 128GB modules for the Supermicro X14SBI-F platform. It targets server and workstation operators who need maximum registered capacity with error correction for mission-critical workloads. The modules run at 6400MHz with CL52 latency at 1.1V.

Upgrade From Lower Capacity RDIMMs

The jump is worth it when your current registered DIMM population leaves free slots but the workload demands more addressable memory for virtualization, databases or AI datasets. Replacing smaller RDIMMs with this 8x128GB kit fills every channel with quad-rank density without changing voltage or form factor.

Installation And Common Issues

Installation follows standard 288-pin DDR5 RDIMM seating in the Supermicro X14SBI-F slots; refer to the board manual for population order. The most frequent issues are mixing ranks across channels, skipping required BIOS updates for 128GB modules, or populating slots in an unsupported sequence that prevents training.

I korthet

  • 1TB capacity across 8 modules expands server memory for large datasets
  • DDR5 6400MHz CL52 delivers high throughput with low latency
  • ECC registered design detects and corrects errors for data integrity
  • 10V operation reduces power draw under heavy workloads
  • Validated for Supermicro X14SBI-F ensures plug-in compatibility

Specifikationer

BrandNEMIX RAM
SeriesSupermicro Compatible Series Server Memory
ModelDDR5 ECC RDIMM Registered Server RAM
Part NumberMR51200-744K8
Capacity1TB (8 x 128GB)
ECCYes
Buffered/RegisteredRegistered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.10V
Compatible SystemSupermicro
CAS LatencyCL52
Heat SpreaderNo
Type288-PIN DDR5 RDIMM
Rank4Rx4
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content1TB (8 x 128GB) DDR5 6400MHz PC5-51200 4Rx4 1.1V 288-PIN ECC RDIMM KIT

Frågor om den här produkten

Will the 288-pin DDR5 RDIMM modules fit the Supermicro X14SBI-F memory slots?

Yes, the 288-pin DDR5 RDIMM form factor matches the memory slots on the Supermicro X14SBI-F motherboard.

What is the correct sequence for populating the eight 128GB modules during installation?

Follow the Supermicro X14SBI-F manual to populate channels in the prescribed order; the common error is filling slots sequentially instead of balancing across channels.

When should the registered ECC modules be replaced if correctable error counts rise?

Replace modules when the system logs show increasing correctable ECC errors, indicating chip degradation before uncorrectable failures occur.

Även i den här avdelningen

Andra har jämfört dessa

Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.