BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 $
0.00277988BTC
Διαθέσιμο
NEMIX RAM
NEMIX RAM 4GB DDR3 1333 PC3-10600 1.35V 204-Pin SODIMM POSIFLEX PS-3616Q memory upgrade
4 GB DDR3-1333 SODIMM for POSIFLEX PS-3616Q terminals, 1.35 V low-voltage operation
- Capacity4GB
- SpeedDDR3 1333 (PC3 10600)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.50V
- Designed for POSIFLEX PS-3616Q terminal
- 4GB DDR3 1333MHz boosts POS responsiveness
- Low 1.35V voltage reduces power draw
- 204-pin SODIMM fits factory memory slot
- Tested with major OEM Samsung, Micron, Hynix chips
POSIFLEX PS-3616Q DDR3 upgrade
This 4 GB DDR3 SODIMM is built for the POSIFLEX PS-3616Q fanless point-of-sale terminal. It provides a direct memory increase for that specific system. The module uses a 204-pin layout and operates at 1.35 V low voltage. Buyers needing memory for other POS hardware or consumer laptops cannot use this part.
DDR3 1333 speed and CL9 timing
The memory runs at 1333 MT/s with a CAS latency of CL9. This is the practical ceiling of the DDR3 1333 standard used by the terminal. Systems requiring faster DDR3 speeds or lower latencies will not gain them from this module. The unbuffered, non-ECC design also limits use to platforms that do not require registered or error-correcting memory.
4 GB capacity in a single rank module
The 4 GB density is delivered as a 2Rx8 configuration on one stick. It suits the terminal's typical workload and single-slot layout. Environments that need more than 4 GB total memory or multiple modules for dual-channel operation cannot be satisfied by this kit. Higher-capacity DDR3 SODIMMs are not addressed by this product.
Βασικά χαρακτηριστικά
- Designed for POSIFLEX PS-3616Q terminal
- 4GB DDR3 1333MHz boosts POS responsiveness
- Low 1.35V voltage reduces power draw
- 204-pin SODIMM fits factory memory slot
- Tested with major OEM Samsung, Micron, Hynix chips
Προδιαγραφές
| Brand | NEMIX RAM |
|---|---|
| Series | POSIFLEX POS Series Point of Sale Kiosk Memory |
| Model | POSIFLEX POS DDR3 1333MHZ Non-ECC Unbuffered SODIMM |
| Part Number | MS10600-428K1 |
| Capacity | 4GB |
| Speed | DDR3 1333 (PC3 10600) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.50V |
| Compatible System | POSIFLEX POS |
| CAS Latency | CL9 |
| Heat Spreader | No |
| Type | 204-Pin DDR3 SODIMM |
| Rank | 2Rx8 |
| Features | DDR3 Non-ECC Unbuffered SODIMM Motherboard Compatible |
| Package Content | 4GB (1X4GB) DDR3 1333MHZ PC3-10600 2Rx8 1.35V 204-PIN Non-ECC Unbuffered SODIMM |
Ερωτήσεις για αυτό το προϊόν
Should I pick the 4GB module or a larger capacity for the POSIFLEX PS-3616Q?
This listing is a single 4GB stick; the terminal's maximum supported memory determines whether you can add more.
What does the 1333MHz rating deliver in the PS-3616Q?
It runs at DDR3-1333 with CL9 latency, matching the system's native memory speed for stable POS operation.
Is the 204-pin SODIMM interface the limiting factor for throughput?
Yes, the 204-pin DDR3 SODIMM form factor caps the module at the PC3-10600 data rate.
Επίσης σε αυτό το ράφι
Οι πελάτες σύγκριναν και αυτά
Ίδιο ράφι, ίδιο ταμείο — οκτώ νομίσματα και κλείδωμα ισοτιμίας 30 λεπτών.
