BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 $
0.00276899BTC
Διαθέσιμο
NEMIX RAM
NEMIX RAM 4GB DDR3 1333 PC3-10600 2Rx8 1.35V 204-Pin SODIMM POSIFLEX HS-2510W JIVA memory upgrade
4GB DDR3 1333 SODIMM upgrades POSIFLEX HS-2510W JIVA point-of-sale systems
- Capacity4GB
- SpeedDDR3 1333 (PC3 10600)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.50V
- Designed for POSIFLEX HS-2510W JIVA systems
- DDR3 1333 speed with CL9 latency
- Low 1.35V voltage reduces power draw
- 2Rx8 rank on 204-pin SODIMM form factor
- Tested with major OEM Samsung, Micron, Hynix chips
Targeted POS Upgrade
This 4 GB DDR3 SODIMM is built specifically for the POSIFLEX HS-2510W JIVA desktop point-of-sale terminal. It matches the system's 204-pin slot and PC3-10600 timing so the upgrade installs without configuration changes.
Sustained Workload Stability
Modules are stress-tested under continuous load using major OEM chips from Samsung, Micron or Hynix to verify reliability during long retail shifts. Unbuffered non-ECC operation at CL9 latency keeps data flowing steadily through extended transactions.
Voltage Confirmation Required
The stick is rated for 1.35 V low-voltage operation while the specification table also lists 1.50 V; only systems that support the lower voltage will run this module correctly.
Βασικά χαρακτηριστικά
- Designed for POSIFLEX HS-2510W JIVA systems
- DDR3 1333 speed with CL9 latency
- Low 1.35V voltage reduces power draw
- 2Rx8 rank on 204-pin SODIMM form factor
- Tested with major OEM Samsung, Micron, Hynix chips
Προδιαγραφές
| Brand | NEMIX RAM |
|---|---|
| Series | POSIFLEX POS Series Point of Sale Kiosk Memory |
| Model | POSIFLEX POS DDR3 1333MHZ Non-ECC Unbuffered SODIMM |
| Part Number | MS10600-428K1 |
| Capacity | 4GB |
| Speed | DDR3 1333 (PC3 10600) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.50V |
| Compatible System | POSIFLEX POS |
| CAS Latency | CL9 |
| Heat Spreader | No |
| Type | 204-Pin DDR3 SODIMM |
| Rank | 2Rx8 |
| Features | DDR3 Non-ECC Unbuffered SODIMM Motherboard Compatible |
| Package Content | 4GB (1X4GB) DDR3 1333MHZ PC3-10600 2Rx8 1.35V 204-PIN Non-ECC Unbuffered SODIMM |
Ερωτήσεις για αυτό το προϊόν
How much power does this 1.35 V DDR3 SODIMM draw when the POS terminal runs continuously?
The module is rated at 1.35 V, which is lower than the standard 1.50 V DDR3 voltage, so it consumes less power and generates less heat during all-day operation in the POSIFLEX HS-2510W JIVA.
What must the POSIFLEX HS-2510W JIVA already have for this 204-pin SODIMM to work?
The system needs a free DDR3 SODIMM slot that accepts 2Rx8 non-ECC unbuffered modules at 1333 MHz (PC3-10600) and supports 1.35 V operation.
Will this CL9 1333 MHz module run reliably alongside the original memory installed in the HS-2510W JIVA?
Yes, it matches the factory speed of 1333 MHz and CAS latency CL9, so it will synchronise with existing DDR3 SODIMMs without down-clocking or timing conflicts.
Επίσης σε αυτό το ράφι
Οι πελάτες σύγκριναν και αυτά
Ίδιο ράφι, ίδιο ταμείο — οκτώ νομίσματα και κλείδωμα ισοτιμίας 30 λεπτών.
