Kami menerima kripto — jadi koin yang anda simpan boleh membeli perkakasan sebenar.Bayar dengan kripto, belanjakannya untuk perkakasan sebenar. Penghantaran berinsurans percuma ke seluruh dunia untuk belian melebihi USD 399. Kotak biasa tanpa jenama, dihantar dari Jerman.Penghantaran berinsurans percuma untuk belian melebihi USD 399. Kadar anda dikunci selama 30 minit sebaik sahaja proses pesanan bermula.Kadar dikunci selama 30 minit. Setiap item disegel, nombor sirinya disemak, dan dilindungi waranti 24 bulan.Disegel, waranti 24 bulan.

Barang disimpan Log masuk
Green 204-pin DDR3 SODIMM module with black memory chips

NEMIX RAM

NEMIX RAM 4GB DDR3 1333 PC3-10600 2Rx8 1.35V 204-Pin SODIMM POSIFLEX HS-2510W JIVA memory upgrade

SKU CH-XCJF-C3FPB

4GB DDR3 1333 SODIMM upgrades POSIFLEX HS-2510W JIVA point-of-sale systems

  • Capacity4GB
  • SpeedDDR3 1333 (PC3 10600)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.50V
  • Designed for POSIFLEX HS-2510W JIVA systems
  • DDR3 1333 speed with CL9 latency
  • Low 1.35V voltage reduces power draw
  • 2Rx8 rank on 204-pin SODIMM form factor
  • Tested with major OEM Samsung, Micron, Hynix chips

Targeted POS Upgrade

This 4 GB DDR3 SODIMM is built specifically for the POSIFLEX HS-2510W JIVA desktop point-of-sale terminal. It matches the system's 204-pin slot and PC3-10600 timing so the upgrade installs without configuration changes.

Sustained Workload Stability

Modules are stress-tested under continuous load using major OEM chips from Samsung, Micron or Hynix to verify reliability during long retail shifts. Unbuffered non-ECC operation at CL9 latency keeps data flowing steadily through extended transactions.

Voltage Confirmation Required

The stick is rated for 1.35 V low-voltage operation while the specification table also lists 1.50 V; only systems that support the lower voltage will run this module correctly.

Ciri-ciri utama

  • Designed for POSIFLEX HS-2510W JIVA systems
  • DDR3 1333 speed with CL9 latency
  • Low 1.35V voltage reduces power draw
  • 2Rx8 rank on 204-pin SODIMM form factor
  • Tested with major OEM Samsung, Micron, Hynix chips

Spesifikasi

BrandNEMIX RAM
SeriesPOSIFLEX POS Series Point of Sale Kiosk Memory
ModelPOSIFLEX POS DDR3 1333MHZ Non-ECC Unbuffered SODIMM
Part NumberMS10600-428K1
Capacity4GB
SpeedDDR3 1333 (PC3 10600)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.50V
Compatible SystemPOSIFLEX POS
CAS LatencyCL9
Heat SpreaderNo
Type204-Pin DDR3 SODIMM
Rank2Rx8
FeaturesDDR3 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content4GB (1X4GB) DDR3 1333MHZ PC3-10600 2Rx8 1.35V 204-PIN Non-ECC Unbuffered SODIMM

Soalan tentang produk ini

How much power does this 1.35 V DDR3 SODIMM draw when the POS terminal runs continuously?

The module is rated at 1.35 V, which is lower than the standard 1.50 V DDR3 voltage, so it consumes less power and generates less heat during all-day operation in the POSIFLEX HS-2510W JIVA.

What must the POSIFLEX HS-2510W JIVA already have for this 204-pin SODIMM to work?

The system needs a free DDR3 SODIMM slot that accepts 2Rx8 non-ECC unbuffered modules at 1333 MHz (PC3-10600) and supports 1.35 V operation.

Will this CL9 1333 MHz module run reliably alongside the original memory installed in the HS-2510W JIVA?

Yes, it matches the factory speed of 1333 MHz and CAS latency CL9, so it will synchronise with existing DDR3 SODIMMs without down-clocking or timing conflicts.

Juga di rak ini

Pelanggan turut membandingkan

Rak yang sama, checkout yang sama — lapan koin kripto dan kunci kadar 30 minit.