Δεχόμαστε κρυπτονομίσματα — έτσι ώστε αυτά που κατέχετε να μπορούν να αγοράσουν πραγματικό εξοπλισμό.Πληρώστε σε κρυπτονομίσματα, ξοδέψτε τα σε πραγματικό εξοπλισμό. Δωρεάν ασφαλισμένη αποστολή παγκοσμίως άνω των 399 $. Ουδέτερες κούτες αποστολής, χωρίς σήμανση, από τη Γερμανία.Δωρεάν ασφαλισμένη αποστολή άνω των 399 $. Η ισοτιμία σας κλειδώνει για 30 λεπτά μόλις ανοίξει το ταμείο.Κλείδωμα ισοτιμίας 30 λεπτών. Κάθε προϊόν είναι σφραγισμένο, ελεγμένο ως προς τον σειριακό αριθμό του, και καλύπτεται από εγγύηση 24 μηνών.Σφραγισμένο, με εγγύηση 24 μηνών.

Παρακολουθούμενα είδη Σύνδεση
Six green DDR5 RDIMM sticks in static bag

NEMIX RAM

NEMIX RAM 576GB (6x96GB) DDR5-5600 CL46 1.1V 2Rx4 ECC RDIMM Supermicro H13SRH memory upgrade

SKU CH-4EK4-YB1G5

A 576GB DDR5 ECC RDIMM kit of six 96GB modules running at 5600MHz with CL46 latency and 1.1V registered operation, validated for the Supermicro H13SRH motherboard

  • Capacity576GB (6 x 96GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 576GB 6X96GB

Προβολή 18 ακόμη διαμορφώσεων

Speed 5600MHz

  • 576 GB total capacity from six 96 GB modules for high-density server workloads
  • DDR5-5600 speed with CL46 latency at 1.1 V for rated performance
  • Registered ECC RDIMM architecture corrects single-bit errors and offloads the memory controller
  • 288-pin 2Rx4 form factor matches the Supermicro H13SRH motherboard requirements
  • Major OEM Samsung, Micron or Hynix chips deliver enterprise-grade reliability

Capacity and Compatibility

This 576GB kit contains six 96GB DDR5 RDIMM modules built for the Supermicro H13SRH motherboard. Registered ECC architecture and 2Rx4 organisation let the board run every slot at the rated 5600 MT/s speed without down-clocking. The exact voltage and timing match the platform's memory controller requirements for immediate recognition at full capacity.

Thermals and Power

Modules operate at 1.1V with no heat spreader, relying on the server chassis airflow for cooling. Registered buffering reduces electrical load on the memory controller, helping keep system power draw stable when all six DIMMs are populated. Silent operation is inherent because no active cooling is attached to the sticks themselves.

Deciding Specification

The 288-pin DDR5 RDIMM form factor with CL46 latency and ECC is the single spec that determines fit; UDIMM, SODIMM or non-ECC modules will not work in this board. Buyers whose systems require a different pin count, voltage or rank configuration must select another kit.

Βασικά χαρακτηριστικά

  • 576 GB total capacity from six 96 GB modules for high-density server workloads
  • DDR5-5600 speed with CL46 latency at 1.1 V for rated performance
  • Registered ECC RDIMM architecture corrects single-bit errors and offloads the memory controller
  • 288-pin 2Rx4 form factor matches the Supermicro H13SRH motherboard requirements
  • Major OEM Samsung, Micron or Hynix chips deliver enterprise-grade reliability

Προδιαγραφές

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-9624K6
Capacity576GB (6 x 96GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content576GB 6X96GB DDR5 5600MHz PC5-44800 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Άλλες εκδόσεις αυτού του μοντέλου

5 ακόμη στην ίδια σειρά

Ίδια οικογένεια, διαφορετική μνήμη, ψύκτρα ή συχνότητα — συγκρίνετε πριν αποφασίσετε.

Ερωτήσεις για αυτό το προϊόν

How do I install the six 96GB DDR5 RDIMMs into the Supermicro H13SRH, and which population step is most often missed?

Populate all six 288-pin slots following the motherboard manual's exact DIMM order; the step most often missed is verifying the approved population sequence for full 576GB capacity before powering on.

What maintenance or replacement will the 2Rx4 ECC registered modules need during their service life?

The modules have no heat spreader and no moving parts; maintenance is limited to keeping slot contacts clean and relying on on-die ECC to correct single-bit errors, with replacement only if a module fails.

What limit appears first when the 5600MHz CL46 kit runs sustained workloads at 1.1V?

The registered buffer and 2Rx4 organisation offload the memory controller, so the first sustained-use limit is the motherboard's maximum supported capacity and population rules rather than the memory kit itself.

Επίσης σε αυτό το ράφι

Οι πελάτες σύγκριναν και αυτά

Ίδιο ράφι, ίδιο ταμείο — οκτώ νομίσματα και κλείδωμα ισοτιμίας 30 λεπτών.